classic | mobile
 

Search...

 

Commercial Shearing’s valve test stand
1st Quarter 2017, Hydraulic systems & components


Commercial Shearing’s hydraulic valve test stand enables the company to offer a valuable service to its customers, helping them to achieve major cost savings in replacement valves. Based in Jet Park, Boksburg, Commercial Shearing is a major supplier of hydraulic equipment and solutions to the mining, earthmoving, agricultural and forestry industries.

With this test stand, Commercial Shearing can fully test all functions in its wide range of mobile control valves. These include flow, port and main relief valves with spool leakage, pilot and solenoid functions and set individual spool flows; and port pressure relief valves. Options available include open, closed centre, load sensing, pilot and solenoid operated.

The test stand is equipped with three hydraulic pumps:

• A load-sensing piston pump with pressure up to 310 bar at 100 l/min.

• A gear pump with pressure up to 240 bar at 47 l/min.

• A gear pump with pressure up to 220 bar at 9 l/min.

It also has a flow meter capable of measuring up to 250 l/min for setting individual section flows on stackable valves. The valve shown under test is the model VP Pulsar proportional control valve which has a maximum flow of 190 l/min and a working pressure up to 350 bar.

For more information contact Ken Beaumont, Commercial Shearing, +27 (0)11 397 4264, comshear@global.co.za, www.commercialshearing.co.za


Credit(s)
Supplied By: Commercial Shearing
Tel: +27 11 397 4264
Fax: +27 11 397 3114
Email: comshear@global.co.za
www: www.commercialshearing.co.za
Share via email     Print this page  

Further reading:

  • Thirty years of innovation
    3rd Quarter 2017, The Hydraulic Centre, Hydraulic systems & components
    With the introduction of the third tier Dynamische range of hydraulic products, THC can also offer reasonably priced products with exceptional quality and performance – the best value in the industry. ...
  • High-performance mechanical flange system
    3rd Quarter 2017, Parker Hannifin (Africa), Hydraulic systems & components
    Parker Hannifin has launched the Parker HPF high-performance mechanical flange system for machines and installations with a working pressure up to 420 bar. This meets the increasing requirements of the ...
  • Valves for every eventuality
    3rd Quarter 2017, Bearing Man Group t/a BMG, Hydraulic systems & components
    BMG’s extensive range of components for fluid technology systems encompasses valves, hydraulic hoses and fittings, accumulators, cylinders, heat exchangers, pneumatics, hydraulic motors and hydraulic ...
  • Rotary unions for every need
    3rd Quarter 2017, Stone-Stamcor, Hydraulic systems & components
    Rotoflux supplies a range of rotary unions suited to any industry need. They can operate at speeds up to 20 000 rpm, pressures up to 400 bar and temperatures up to 340°C. The high speed range is available ...
  • Hyflo distributes Parker hose and fittings
    3rd Quarter 2017, Hyflo Southern Africa, Hydraulic systems & components
    Hyflo is now a distributor of high quality Parker hydraulic hose and fittings, which are available at all Hyflo branches in South Africa and Namibia. The core ranges include the 301TC (2SN), 421TC (1SN), ...
  • At the heart of regenerative braking
    3rd Quarter 2017, Axiom Hydraulics, Hydraulic systems & components
    Lightning Systems is an innovative, forward thinking company that saw an opportunity a few years back to bring hydraulic hybrid technology to medium- and heavy-duty fleet vehicles like shuttle buses, ...
  • A new chapter for hydraulics
    2nd Quarter 2017, This Week's Editor's Pick, Hydraulic systems & components
    A new groundbreaking technology could change the face of hydraulics – digital displacement technology (DDT).
  • Freaky hydraulics
    2nd Quarter 2017, This Week's Editor's Pick, Hydraulic systems & components
    There is some great technology that can be developed by mimicking spiders.
  • Don’t play a game of chance
    2nd Quarter 2017, Axiom Hydraulics, Hydraulic systems & components
    Choosing the right load-holding valve shouldn’t be a game of chance and it shouldn’t be a project that takes hours. Now with Sun’s QuickSelect LoadHolding selection tool, you can narrow your options from ...
  • A guide for testing control valve positioners
    2nd Quarter 2017, Comtest, Hydraulic systems & components
    Valves, the actuators that move them and the electronic circuits that control them, are all subject to ageing soon after they are installed. Valve seats wear from repeated seatings and from the liquid ...
  • Avoid fatalities with Faster
    2nd Quarter 2017, Hydrasales, Hydraulic systems & components
    Site engineers need to be extremely careful when staff are connecting attachments to hydraulically powered vehicles. The slightest error or negligent action could be fatal and extremely costly. The Faster ...
  • Intelligent absolute position sensor
    2nd Quarter 2017, Parker Hannifin (Africa), Hydraulic systems & components
    Parker Hannifin has introduced a new integrated absolute position sensor that can provide improved application productivity while offering low installation and maintenance costs. Intellinder equipped ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.