Pneumatic systems & components


Pneumatic systems as an energy efficient alternative

1st Quarter 2018 Pneumatic systems & components

When planning municipal water management systems, it is worthwhile to consider the service life costs. In addition to the purchase price, follow-up costs such as operation, energy consumption, maintenance and repair can become real cost drivers.

Not so with pneumatic automation technology. It is robust, cost-effective and reliable because the compressed air is easy to transport, store and regulate. A comparison of pneumatic and electric actuator technology reveals surprising results in favour of pneumatics. A classic example of a filtration system for a municipal water treatment plant with seven multi-layer filters, seven activated carbon filters and 84 automated process valves revealed that the acquisition costs of a pneumatic system are 28% more advantageous.

So why do pneumatic systems offer such cost benefits? Pneumatic actuators only require electricity for regulating and generating compressed air; the movement itself is triggered by the compressed air. By contrast, electric actuators continuously need energy for the electronics, the heating and movement.

Overload-proof

In water technology plants, process valves are often actuated only infrequently or not at all for long periods of time. This can lead to the formation of deposits and caking and thus to increased breakaway torques or forces. Pneumatic actuators can overcome this problem simply by increasing the air pressure. They cope well with loads without getting damaged and are not affected by differences in temperature, contamination and humidity. Pneumatic actuators only require electricity for regulating and generating compressed air and act directly on the shut-off valves.

Since pneumatic actuators are overload-proof and a higher actuation force can be achieved very simply by increasing the pressure, it is often possible to use smaller sizes with a lower weight than would be the case for electric actuators. Provided the tubing has zero leakage and the units are precisely dimensioned, the resulting solutions are energy-efficient. Pneumatic systems from Festo are able to deliver high forces of up to 75 000 N and torques of up to 10 000 Nm.

Digitalisation for even greater energy efficiency

The brand-new Festo Motion Terminal VTEM catapults pneumatics into the age of Industry 4.0 with apps that can replace over 50 individual components. Just as the smartphone turned the mobile communication market on its head a decade ago, so too is the Festo Motion Terminal set to revolutionise automation technology. The new type of function integration, combined with software apps, simplifies the entire value chain, since only one piece of hardware is now required.

With the Motion Terminal, for example, different pressure levels can be used for opening and closing process valves. This can drastically decrease compressed air consumption. In addition, a diagnostic function can be activated after a freely selectable number of switching operations. This function detects any leaks on an actuator-specific basis and sends specific maintenance messages or shuts down that section of the plant. This makes laborious manual leakage detection in extensive compressed air networks unnecessary.

Energy efficiency perspectives

The energy efficiency module MSE6-E2M, makes saving energy easy. The integrated flow rate and pressure sensors monitor and automatically reduce the air consumption in systems. The module detects the operating status when no compressed air is consumed, and automatically shuts off the supply.

Once the supply is shut off, it checks for any leaks in the system. If there is too much of a drop, the controller is notified. This automatic leakage detection system enables specific maintenance to be carried out, and the continuous monitoring of consumption increases process reliability.

Simple and uncomplicated

Pneumatics is an uncomplicated technology, and is easy to install. Apart from end-position sensing and monitoring the compressed air supply, it doesn’t need to be monitored and checked. It follows the ‘fit and forget’ principle.

Pneumatic actuators have proven to be resistant to vibration and are durable. They are made from a small number of components and are thus less likely to break down. Pneumatic actuators are also resistant to continuous loads and remain maintenance-free over their entire service life.

Unbreakable

With up to 1 million switching cycles, the average service life of pneumatic actuators is rather impressive. This is true even in harsh environments with high temperature differences, contamination and humidity. Extreme heat or cold and humidity cannot harm corrosion-resistant pneumatic components. They are temperature-insensitive between -20 and +80°C, with special low temperature designs being insensitive down to -40°C and high temperature designs up to 120°C. Components made entirely of stainless steel supplement the product portfolio.

For more information contact Kershia Beharie, Festo, +27 (0)11 971 5509, kershia.beharie@festo.com, www.festo.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Oil-free beer and wine processing
Pneumatic systems & components Hydraulic systems & components
The food and beverage industry depends on superior quality, 100% oil-free compressed air to eliminate the presence of unwanted oil vapour throughout the production line.

Read more...
Ten considerations for optimum use of vacuum technology
Pneumatic systems & components
Vacuum technology plays a huge role in the packaging of foodstuffs and other products. Here are ten considerations to help you use vacuum technology as effectively and efficiently as possible, so that you can optimise processes and cut operating costs.

Read more...
Case History 191: The weakest link
Pneumatic systems & components
Which is the weakest link in a control loop? The answer, without any doubt is that, in most cases, the final control element is the weakest link.

Read more...
Thor’s hammer of pneumatic knockers
neaMetrics Pneumatic systems & components
Neu Matics acts as sole distributor for a range of internationally recognised brands, and one of these is the pneumatic knocker from singold.

Read more...
New IO-Link master future-proofs pneumatic valve systems
Emerson Automation Solutions Pneumatic systems & components
Emerson has introduced a new Class A IO-Link master that provides customers with a cost-effective solution for smart and analogue sensor connectivity on the AVENTICS Series G3 Fieldbus platform.

Read more...
Versatile cylinder monitoring
ifm - South Africa Pneumatic systems & components
This IO-Link cylinder sensor from ifm, with two configurable hardware outputs, will upgrade your machine in no time.

Read more...
Tyre-actuated globe valve
Parker Hannifin - Sales Company South Africa Pneumatic systems & components
Parker Hannifin has launched a tyre-actuated pneumatic valve in its Bestobell cryogenic globe valve range. The valve can be operated remotely with a single switch command, providing much greater speed and convenience than a manually operated type.

Read more...
A new electric actuator
SMC Corporation South Africa Pneumatic systems & components
SMC’s new EQ electric actuator controls an electric drive in the same way as a pneumatic solenoid valve and the setup is simple and easy to control.

Read more...
merSETA and Festo to establish 4IR centre
Festo News & events
merSETA partnered with Festo, a leading supplier of industrial automation solutions and a global leader in technical education, to establish a 4IR skills centre at Maluti TVET College.

Read more...
Latest trends in pneumatics systems
Pneumatic systems & components
There is a misconception that there is not much innovation in the pneumatics field, but a closer look reveals otherwise.

Read more...