Electrical switching & drive systems & components


More applications for Sinamics servo drive

1 May 2016 Electrical switching & drive systems & components

Siemens has extended its basic servo drive system, consisting of the Sinamics V90 converter and the Simotics S-1FL6 servo motor, to serve a much wider field of application. The basic servo drive system is now available with 200 volt converters and motors with lower shaft heights and lower moments of inertia. This is in addition to the familiar 400 volt versios with a higher moment of inertia in the servo motor. The 200 volt converters are up to 25% smaller than the 400 volt version and therefore save additional space in the control cabinet.

With a total of eight converter sizes and seven motor shaft heights with a power range from 0,05 to 7,0 kW, the system is suitable for service in single- and three-phase networks. Thanks to the lower moments of inertia of the motors, a wide range of motion control tasks can be realised in a cost-efficient manner. Here the focus is on dynamic motion and processing – for example positioning, transporting and winding in a wide range of applications.

Numerous integrated functions such as pulse train input positioning, USS/Modbus connection, internal positioning ,as well as speed and torque control enable users to reduce their machine costs. A braking resistor has been integrated as standard to improve dynamic performance. Furthermore, the servo converter also features a rapid pulse train input of up to 1 MHz and supports absolute encoders with a 20 bit resolution. These functions give the system a high level of fast positioning accuracy and a low level of speed ripple. The improved servo performance is made possible by a number of features, including the threefold overload capacity of the Simotics S-1FL6 servo motor and the optimally coordinated combination of motor and converter as Integrated Drive Systems (IDS). Using IDS-based drive technology, Siemens boosts productivity, energy efficiency and reliability in all automation environments and throughout the entire lifecycle.

The Sinamics V90 is also characterised by its outstanding ease of use. For example, the Sinamics V-Assistant software tool, which is available as a free download, supports commissioning, engineering and diagnosis of the converter. Intuitive menu navigation gives a clear overview of the commissioning procedure. Thanks to coated electronic modules in the Sinamics V90 and a protection rating of IP65 for the Simotics S-1FL6, the drive system is extremely rugged – even in difficult ambient conditions. The integrated Safe Torque Off (STO) safety function prevents the motor from rotating unexpectedly, thereby improving safety for both machine and operator.

For more information contact Jennifer Naidoo, Siemens Southern Africa, +27 (0)11 652 2795, jennifer.naidoo@siemens.com, www.siemens.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Precise detection of complex rotational movements
Beckhoff Automation Electrical switching & drive systems & components
The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit - a gyroscope. This provides accurate detection of acceleration and rotational motion in addition to shock, vibration and tilt measurement, both as preprocessed values and as raw sensor data.

Read more...
Energy management system for electrohydrostatic actuation systems
Electrical switching & drive systems & components
In the machine manufacturing industry, more drive systems are being converted from servo-hydraulic throttle to electrohydrostatic actuation systems. The four-quadrant capability of the electrohydrostatic pump unit and servo drive used in this technology, in combination with the new Moog energy management system, allows regenerative power flows generated during braking or pressure relief to be stored and reused.

Read more...
Drive solution for stacker reclaimer
Electrical switching & drive systems & components
Hägglunds Drives South Africa recently completed a retrofit project on the bucket wheel of a stacker reclaimer at Richards Bay Coal Terminal. The project entailed replacing a gearbox drive solution with a direct drive solution from Hägglunds Drives SA.

Read more...
Kamoa-Kakula power pack order for SEW-EURODRIVE
SEW-EURODRIVE Electrical switching & drive systems & components
With well over 100 units already delivered, SEW-EURODRIVE is set to continue supplying Ivanhoe Mines’ prestigious Kamoa-Kakula Copper Complex in the Democratic Republic of Congo.

Read more...
Seven ways to reduce production downtime on the plant
Electrical switching & drive systems & components
Production downtime is one of the biggest risks in the manufacturing industry. Follow these seven tips to reduce machine downtime in your production line.

Read more...
The time is now to implement a motor management strategy
Schneider Electric South Africa Editor's Choice Electrical switching & drive systems & components
Motor management plays an all-important role in controlling motor energy costs in various industries, segments and applications. Research and practical experience have consistently shown that effective motor management practices can result in significant energy savings, reduced operational costs, and improved overall system reliability.

Read more...
Rapid overhaul of compressor motors
ACTOM Electrical switching & drive systems & components
Marthinusen & Coutts Zambia was requested by a smelter based in the Copperbelt to provide an in-country repair solution for its two critical 4,5 MW compressor motors. The company was given only three weeks in which to overhaul and commission the motors.

Read more...
PC-based motion control on a labelling machine
Beckhoff Automation Editor's Choice Electrical switching & drive systems & components
For 50 years, Bausch+Ströbel in Germany has been developing packaging and production systems for the pharmaceutical industries. The company’s goal is to offer the best technical and economical solutions for the challenges of modern industry. Its new ESA1025 labelling machine shows how this is achieved with PC-based control from Beckhoff as the central motion controller.

Read more...
Thrust for hybrid electric flying
Editor's Choice Electrical switching & drive systems & components
Several leading academic institutes in Germany are collaborating on the future of hybrid electric flying. The partners are researching an entirely new propulsion system for medium-range aircraft with up to 35 passengers.

Read more...
Precise knowledge for precise applications
Electrical switching & drive systems & components
Aerotech has been supplying standard product solutions such as motors, drives, controls and positioning tables since 1970. Customised motion subsystems include positioning systems on granite structures with undercarriage and vibration isolation, and also external measurement systems.

Read more...