Electrical switching & drive systems & components


Automated tool magazines

1st Quarter 2018 Electrical switching & drive systems & components

The tool terminal developed by Wassermann Technologie in collaboration with system integrator, Becker Engineering, is characterised by an exceptionally compact design and high flexibility. This is largely due to the open and modular control technology from Beckhoff, with which machine tools can be seamlessly connected to the most diverse control systems available.

Christoph Neuhaus, application software developer at Becker Engineering in Leichlingen, Germany says, “Higher flexibility gives the option to integrate the widest variety of machine tools with the most diverse control platforms. The openness of PC-based control is crucial for this capability. For instance, third-party software can also run on the Beckhoff control hardware, which among other things facilitates access to the tool tables for the individual machine.”

Flexible in structure and use

The concentrically structured tool terminal consists of one, or the addition of up to two more drums running inside one another. The tools are handled by a linear unit with an integrated tool changer. The latter places the tools in the drums and also takes them to a tool buffer or directly to a tool changer on the machine. “The tool terminal offers tool management for up to 9000 tools and is suitable for use as a direct magazine and tool store for tool management. Julian Becker, application software developer at Becker Engineering, describes the terminal as an intelligent auxiliary magazine. “The tool terminal can operate completely autonomously. For that purpose it has its own tool management, database and sequential control system as well as its own interface to the machine tool. In addition, there is software in the tool magazine itself for external auxiliary handling, interfaces to peripheral devices and integrated data acquisition for the tooling,” Becker says.

The high flexibility of the tool terminal means that the customer benefits from significant cost savings. “In the tool terminal we have designed a standard magazine with a wide range of uses, and that is reflected in its excellent price-to-performance ratio. However, an individual connection to a machine can be realised entirely according to customer specifications if desired. The tool terminal is available as standard in two model variants: S-Curve for up to 280 tools and D-Curve for a maximum of 570 tools,” he explains.

Open, scalable and efficient control technology

According to Neuhaus, numerous benefits have been achieved. “PLC and additional high-level language applications can be realised on one universal multitasking platform. Another advantage is high scalability. Should performance requirements increase, the system enables the uncomplicated migration of a control project to more powerful hardware, such as a device equipped with a multi-core processor, for example. For Neuhaus, other important aspects of PC-based control are the simulation options available without additional licence or hardware requirements. “The complete system can be simulated on your own development PC. This means, for example, that you can convert the motion axes to simulation axes or map the I/O behaviour similar to that with hardware using software simulation blocks,” he concludes.

Convenient and efficient motion control

In a recently implemented tool terminal with two drums, a total of five servo axes are used for fast and precise tool handling. The associated AX5000 servo drives and AM8000 servomotors are controlled by a CX2030 embedded PC with TwinCAT NC PTP. In addition, one rotational axis is provided for each of the two tool drums as well as a vertical axis for reaching the desired drum level, a horizontal axis for reaching into the level and a rotational axis for a double gripper. The pneumatic control for the double gripper is an additional automation task. Hahl adds: “The tools are transferred from the drum to the outside via the gripper rotation axis. This can also be implemented as a telescopic axis in order to transfer the tool directly to a magazine on the machine without intermediate handling.”

The motion control application was implemented in TwinCAT software with the aid of PLCopen motion blocks, which Neuhaus says has proven itself in practice: “The programming of the motion functions with the associated function blocks was very simple and extremely time-saving. Another advantage of the Beckhoff drive technology is the One Cable Technology (OCT). It dramatically reduces assembly and material costs and allows the use of smaller cable carrier chains, facilitating more compact designs. Apart from that, the electronic name plate considerably accelerates startup procedures.”

For more information contact Michelle Murphy, Beckhoff Automation, +27 (0)11 795 2898, michellem@beckhoff.com, www.beckhoff.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Precise detection of complex rotational movements
Beckhoff Automation Electrical switching & drive systems & components
The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit - a gyroscope. This provides accurate detection of acceleration and rotational motion in addition to shock, vibration and tilt measurement, both as preprocessed values and as raw sensor data.

Read more...
Energy management system for electrohydrostatic actuation systems
Electrical switching & drive systems & components
In the machine manufacturing industry, more drive systems are being converted from servo-hydraulic throttle to electrohydrostatic actuation systems. The four-quadrant capability of the electrohydrostatic pump unit and servo drive used in this technology, in combination with the new Moog energy management system, allows regenerative power flows generated during braking or pressure relief to be stored and reused.

Read more...
Drive solution for stacker reclaimer
Electrical switching & drive systems & components
Hägglunds Drives South Africa recently completed a retrofit project on the bucket wheel of a stacker reclaimer at Richards Bay Coal Terminal. The project entailed replacing a gearbox drive solution with a direct drive solution from Hägglunds Drives SA.

Read more...
Kamoa-Kakula power pack order for SEW-EURODRIVE
SEW-EURODRIVE Electrical switching & drive systems & components
With well over 100 units already delivered, SEW-EURODRIVE is set to continue supplying Ivanhoe Mines’ prestigious Kamoa-Kakula Copper Complex in the Democratic Republic of Congo.

Read more...
Seven ways to reduce production downtime on the plant
Electrical switching & drive systems & components
Production downtime is one of the biggest risks in the manufacturing industry. Follow these seven tips to reduce machine downtime in your production line.

Read more...
The time is now to implement a motor management strategy
Schneider Electric South Africa Editor's Choice Electrical switching & drive systems & components
Motor management plays an all-important role in controlling motor energy costs in various industries, segments and applications. Research and practical experience have consistently shown that effective motor management practices can result in significant energy savings, reduced operational costs, and improved overall system reliability.

Read more...
Rapid overhaul of compressor motors
ACTOM Electrical switching & drive systems & components
Marthinusen & Coutts Zambia was requested by a smelter based in the Copperbelt to provide an in-country repair solution for its two critical 4,5 MW compressor motors. The company was given only three weeks in which to overhaul and commission the motors.

Read more...
PC-based motion control on a labelling machine
Beckhoff Automation Editor's Choice Electrical switching & drive systems & components
For 50 years, Bausch+Ströbel in Germany has been developing packaging and production systems for the pharmaceutical industries. The company’s goal is to offer the best technical and economical solutions for the challenges of modern industry. Its new ESA1025 labelling machine shows how this is achieved with PC-based control from Beckhoff as the central motion controller.

Read more...
Thrust for hybrid electric flying
Editor's Choice Electrical switching & drive systems & components
Several leading academic institutes in Germany are collaborating on the future of hybrid electric flying. The partners are researching an entirely new propulsion system for medium-range aircraft with up to 35 passengers.

Read more...
Precise knowledge for precise applications
Electrical switching & drive systems & components
Aerotech has been supplying standard product solutions such as motors, drives, controls and positioning tables since 1970. Customised motion subsystems include positioning systems on granite structures with undercarriage and vibration isolation, and also external measurement systems.

Read more...