Pneumatic systems & components


Long-term equipment hire is a cost-saver

2nd Quarter 2019 Pneumatic systems & components

Mines require a range of hire equipment from time to time. Precisely what equipment is needed depends on the type of mine. For instance on an open-pit mine, generators and lighting plant are most frequently hired. “Some of the mining contractors also use our high pressure diesel compressors for exploration as well as blast-hole drilling,” explains business development manager for long term rental, Henry Fourie.

On surface during shaft sinking, the mines use electric or diesel 1500 cfm machines. Once the mine is established, then Rand-Air is also capable of supplying air from surface for the underground mining operations to power rock drills of various types. “For this, a popular choice is the 1765 – 2119 cfm electric machines which we have supplied in various quantities, from as few as two units up to 10 units on a compressor bank,” he continues.

Rand-Air also has specially modified electric units for use underground. A major deep-level gold mine, for example, will have a two kilometre deep shaft down to a certain mine level. From the shaft, it can then be as far as a kilometre or more to the rock face where drilling is actually happening. Many older South African mines have been in existence for decades. Over time, the compressed air pipe systems have deteriorated, allowing air to escape and pressure to dissipate from numerous leaks before air actually reaches the driller.

Some of South Africa’s older mines also have surface compressors feeding air underground which have been operational for some time. With these compressors, there is a much greater chance of periodic failures which can take some time to repair. During these periods, hire compressors can play a cardinal role in keeping the mine operational.

Fourie explains that there is no given rental period, although the minimum is usually 12 months, which can be extended to some years. “We have one mining company on our books that has had long-term rental equipment from us for 12 years,” he continues.

Long-term rentals come with the benefit of a lower rate to the mine. With long term rentals, Rand-Air offers very favourable service level agreements which it takes pride in honouring. “Our rapid response times, which we take pride in meeting, form a key part of these agreements,” continues Fourie.

A further factor in favour of long-term rentals is that the mine does not have to employ skilled people specifically to service and maintain compressors or generators.

The challenge that faces Rand-Air with long-term rentals is that production pressures on mines are invariably immense and both men and machinery sometimes have to work in exceptionally harsh environments. However, with both short-term and long-term rentals, customers are always assured of a Rand-Air machine that will look and perform as well as a brand-new unit. Rand-Air service technicians are assiduous in supporting both short-term and long-term rentals. Should a customer ever experience difficulty with a rental unit, the Rand-Air staff member concerned is prepared to field calls from the mine – even in the middle of the night. If need be, after such a call, the sales representative will phone a technician on call who will immediately drive to the mine and rectify any issues.

In terms of any responsibility the mines have for Rand-Air’s hire equipment on a long-term rental, Fourie explains that apart from not intentionally damaging the machines they have none. “Rand-Air takes full responsibility for maintenance as we pride ourselves on our service levels, response times and knowledge of our equipment,” he explains. Depending on the number of machines on site, Rand-Air will have a dedicated staff member on site to ensure continuous faultless functioning of any hire equipment.

“Anyone who works in the mining environment will know what a challenging environment it is to meet demanding production targets,” adds Fourie. “So having someone to provide trouble-free compressed air, power or lighting benefits the mine in every way. Should the mine expand, and it needs more equipment, this is a phone call away without having to find additional capital first.

When this happens, we will give the mine a solution that is custom-made exactly to its requirements,” he says.

“There are many benefits to mines hiring equipment on a long-term basis. Ultimately, by looking to a third party to provide ancillary services, mining operations can conserve operational cash flow as well as capital. In the longer term, this promises the mining company a viable sustainable future with increased profitability horizons,” he concludes.

For more information contact, Henry Fourie, Rand-Air, +27 11 345 0700, [email protected], www.randair.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Oil-free beer and wine processing
Pneumatic systems & components Hydraulic systems & components
The food and beverage industry depends on superior quality, 100% oil-free compressed air to eliminate the presence of unwanted oil vapour throughout the production line.

Read more...
Ten considerations for optimum use of vacuum technology
Pneumatic systems & components
Vacuum technology plays a huge role in the packaging of foodstuffs and other products. Here are ten considerations to help you use vacuum technology as effectively and efficiently as possible, so that you can optimise processes and cut operating costs.

Read more...
Case History 191: The weakest link
Pneumatic systems & components
Which is the weakest link in a control loop? The answer, without any doubt is that, in most cases, the final control element is the weakest link.

Read more...
Thor’s hammer of pneumatic knockers
neaMetrics Pneumatic systems & components
Neu Matics acts as sole distributor for a range of internationally recognised brands, and one of these is the pneumatic knocker from singold.

Read more...
New IO-Link master future-proofs pneumatic valve systems
Emerson Automation Solutions Pneumatic systems & components
Emerson has introduced a new Class A IO-Link master that provides customers with a cost-effective solution for smart and analogue sensor connectivity on the AVENTICS Series G3 Fieldbus platform.

Read more...
Versatile cylinder monitoring
ifm - South Africa Pneumatic systems & components
This IO-Link cylinder sensor from ifm, with two configurable hardware outputs, will upgrade your machine in no time.

Read more...
Tyre-actuated globe valve
Parker Hannifin - Sales Company South Africa Pneumatic systems & components
Parker Hannifin has launched a tyre-actuated pneumatic valve in its Bestobell cryogenic globe valve range. The valve can be operated remotely with a single switch command, providing much greater speed and convenience than a manually operated type.

Read more...
A new electric actuator
SMC Corporation South Africa Pneumatic systems & components
SMC’s new EQ electric actuator controls an electric drive in the same way as a pneumatic solenoid valve and the setup is simple and easy to control.

Read more...
Latest trends in pneumatics systems
Pneumatic systems & components
There is a misconception that there is not much innovation in the pneumatics field, but a closer look reveals otherwise.

Read more...
Magnetic bearings
SKF South Africa Pneumatic systems & components
SKF’s magnetic bearings, which can rotate at up to 50 000 rpm, are now playing a key role in reducing CO2 emissions across a range of industrial applications, including compressors. The company’s magnetic ...

Read more...