Pneumatic systems & components


Customised containerised compressor

First Quarter 2020 Pneumatic systems & components

One of the ways it is possible to exceed customer expectations is to produce effective and innovative solutions to the challenges that they contend with. When Rand-Air business development manager, Henry Fourie was faced with a dusty and demanding challenge, he needed to come up with a solution which would address the problem effectively.

The problem was that the customer manufactures an industrial mineral, and in so doing produces a very fine but exceptionally abrasive dust. This would get into equipment such as compressors and forklifts and clog them up in a very short space of time. What prompted the request from the manufacturer was the fact that it was upgrading and doubling the size of its plant. This new plant would produce an even finer product. However, the plant was already experiencing downtime with its two existing compressors, which were essential for its operation as it operates 24/7. Faced with ongoing downtime, the manufacturer approached Rand-Air for a solution.

Fourie and his colleagues put their heads together and devised a plan. Although this specific solution was a first for Rand-Air, the team was prepared to develop the solution specifically to address this particular customer’s challenge. The answer to the abrasive dust problem lay in placing the compressor into a specially designed, hermetically sealed housing, somewhat like a shipping container. This sealed housing was fitted with special filtered air intakes to make sure that none of external dust reached the compressor.

Air filtration is not a particular speciality of Rand-Air; however, to provide an effective solution in this instance, the Rand-Air team tested various air filtration solutions and came up with one that was optimal. “We put this proposal and the pricing structure to our customer, who was very pleased with the idea and accepted it,” says Fourie. In October 2018, Rand-Air commissioned the construction of the compressor housing and its special filtration arrangement. “We had everything ready for delivery to site on December 21,” he explains.

The compressor that was supplied for this hire is an electrically-driven Atlas Copco GA132FF full-feature unit. To source the housing for this compressor, Rand-Air contracted a manufacturer of portable, insulated cold rooms and refrigerated truck bodies to build the housing for the GA132FF. This housing has special doors built into it to allow for the removal and replacement of the compressor if necessary. The container walls are constructed of a robust, waterproof aluminium board which has an interior filled with polystyrene foam. While it is designed to keep out fine silica quartz dust, it also protects the compressor against severe weather conditions and prevents unauthorised people gaining access to the compressor. “In summer months, the insulation in the container walls will also protect the compressor against overheating,” adds Fourie.

The fineness of the dust was an issue that Rand-Air had to deal with. “First of all, we installed two high-density filters which we believed would cope with the incoming particles. However, these filters clogged up very quickly; and to get around this, we installed lower density filters which, as part of our service to the customer, we change frequently. On the housing, there is an inlet for filtered air, and there is an outlet opposite it to help dissipate heat. Over and above that, we have two extra filters on the container as well as an extraction fan.”

Asked about feedback, Fourie explains that the customer is very happy with the uninterrupted supply of compressed air. “At Rand-Air, we are constantly aware that we are in a very competitive market and, to keep ahead, we have to be extremely innovative and ahead of the market. By doing this, we will continue to successfully differentiate ourselves in the eyes of our valued customers,” he concludes.

For more information contact, Henry Fourie, Rand-Air, +27 11 345 0700, henry.fourie@randair.com, www.randair.com




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Pneumatic and hydraulic solutions
First Quarter 2020 , Pneumatic systems & components
Berntel is expanding its footprint by offering its extensive range of pneumatic products through the Bearings International (BI) branch network. Acquired in 2014 as a complementary company to pneumatic ...

Read more...
Sonic imager for leak detection
First Quarter 2020, Comtest , Pneumatic systems & components
Fluke’s new ii900 is a handheld sonic industrial imager that enables maintenance teams to quickly and accurately locate air, steam, gas and vacuum leaks in compressed air systems. The straightforward, ...

Read more...
Proximity sensors for pneumatic and electronic actuation
First Quarter 2020, Parker Hannifin - Sales Company South Africa , Pneumatic systems & components
Parker Hannifin has introduced a new family of proximity sensors for use with pneumatic or electric actuators in a wide range of automation and motion control applications. P8S magnetic cylinder sensors ...

Read more...
Enhancements to Parker’s valve portfolio
First Quarter 2020, Parker Hannifin - Sales Company South Africa , Pneumatic systems & components
Parker Hannifin has added an expanded range of features and capabilities to its H Series ISO valve platform with flow ranging from Qn 540 to 5900 Nl/mn. Designed with a new universal manifold, the H Series ...

Read more...
Compressed air management made easy
First Quarter 2020, Artic Driers International , Pneumatic systems & components
Compressed air management is an expensive form of energy. A 160 kW air compressor working 24/7/365 costs over R1,25 million a year to operate. It is essential to know the compressed air consumption in ...

Read more...
Identifying energy wastage in compressed air
Fourth Quarter 2019, Artic Driers International , Pneumatic systems & components
Auditing is a real need and the cost savings that can be achieved are huge. What do the various components of a comprehensive air audit tell you?       Air flow testing Often older compressors deliver air ...

Read more...
Class 0 oil-free versus technically oil-free air
Fourth Quarter 2019 , Pneumatic systems & components
Oil-free compressed air is used throughout industry, where the purest compressed air quality is critical to the end product and to the processes involved – in the pharmaceutical or food and beverage sectors, ...

Read more...
Ultrasonic leak detector
Fourth Quarter 2019, SKF South Africa , Pneumatic systems & components
SKF’s TKSU 10 ultrasonic leak detector helps users to quickly find leakages in compressed air or vacuum systems. The instrument is very simple to use and features adjustable sensitivity and intuitive ...

Read more...
Externally monitored pneumatic safety exhaust valve
Fourth Quarter 2019, Parker Hannifin - Sales Company South Africa , Pneumatic systems & components
Parker Hannifin has introduced a new safety exhaust valve that rapidly exhausts compressed air in the event of a fault condition or when a machine has an emergency stop. The P33 is designed for two-channel ...

Read more...
SMC is here to stay
Third Quarter 2019, SMC Corporation South Africa , Pneumatic systems & components
SMC has been making its presence known in the South African market since 2015. Motion Control’s editor paid a visit to incoming general manager, Peter Findlay, to find out more about the company’s progress.

Read more...