3rd Quarter 2013Electrical switching & drive systems & components
Siemens has developed the world‘s first electrically-powered car ferry together with the Norwegian shipyard Fjellstrand. The 80 metre vessel can carry 120 cars and 360 passengers. From 2015 onward, it will serve the route between Lavik and Oppedal, across the Sognefjord.
The ship‘s batteries will be recharged in the breaks between crossings, a procedure which only takes 10 minutes. The vessel currently serving this route uses approximately one million litres of diesel a year and emits 2680 tons of carbon dioxide and 37 tons of nitrogen oxides. The electrically-powered ferry was developed for submission to a competition organised by Norway‘s Ministry of Transport. As a reward for winning the competition, the shipping company Norled has been granted the licence to operate the route until 2025.
The ferry has been specially designed to accommodate the requirements of an electric drive system. As a catamaran with two slim hulls, it offers less resistance in the water than a conventional vessel. Furthermore, the hulls are made of aluminium instead of steel, which is conventionally used. Rather than a diesel engine, the ferry is equipped with electric motors to drive the ship‘s two screws. These motors are powered by a battery weighing 10 tons. All in all, the new vessel weighs only half as much as a ferry of conventional design. This saving has a direct impact on the specifications of the drive system.
Whereas the ferry currently serving the route has an engine with an output of 1500 kW, the battery in the new vessel will have an output of 800 kW. In normal conditions, operating at a speed of 10 knots, battery power of 400 kW will suffice.
The crucial feature of the new ferry is that it only takes 10 minutes to recharge the batteries. In the two small villages linked by the ferry, however, the local grid is not equipped to deliver such a large amount of power in such a short space of time. To deal with this problem, batteries have been installed at each port.
These recharge the ferry‘s battery during turnaround and are then themselves slowly recharged from the local grid. Hundreds of ferries link Norway‘s mainland to the islands off its coast and provide routes across its many fjords. Using today‘s battery and recharging technology, all crossings of up to 30 minutes in duration could be served by electrically powered vessels.
Beckhoff’s XPlanar boosts productivity in medical device assembly Beckhoff Automation
Electrical switching & drive systems & components
The intelligent transport system, XPlanar from Beckhoff provided the basis for an innovative system concept allowing the specialists at Automation NTH to reduce the space requirement of an assembly machine for medical diagnostic devices by a factor of 10.
Read more...Smart features increase crane safety
Electrical switching & drive systems & components
The newly launched Konecranes S series hoist offers a large bouquet of smart features which not only increase lifting device safety but also deliver a higher level of operator protection.
Read more...Redefining industrial lifting
Electrical switching & drive systems & components
The Konecranes S-series hoist redefines industrial lifting through its integration of a ground-breaking synthetic rope with smart features, a lifting capacity of 20 tons, and the ability to adapt to diverse girder configurations.
Read more...Seven years of uninterrupted service
Electrical switching & drive systems & components
A set of hydraulically operated Corflex pinch valves, installed in 2018 at a major North African gold mine, has delivered in one of the continent’s most demanding slurry-handling applications.
Read more...New generation soft starter ranges Schneider Electric South Africa
Electrical switching & drive systems & components
Schneider Electric has launched its new generation Altivar ATS430 and ATS490 soft starter ranges in Anglophone Africa, the latest innovations in motor control technology.
Read more...Reinventing the wheel
Editor's Choice Electrical switching & drive systems & components
Once a curiosity in the early automotive age, in-wheel motors are now re-emerging with real promise. From electric cars to commercial vehicles and even aircraft, they are on the verge of transforming transportation engineering.
Read more...NORD modular drives for frequently changing motor speeds Bearing Man Group T/A BMG
Electrical switching & drive systems & components
BMG has made a substantial investment over the years to ensure assembly, stockholdings and technical support for the Nord range are in line with stringent international quality, safety and environmental standards.
Read more...PC-based control for sustainable fertiliser production on an industrial scale Beckhoff Automation
Electrical switching & drive systems & components
On a farm in the USA, valuable ammonia is extracted from slurry and processed into ammonium sulphate. NSI Byosis has transformed this complex process into a flexible modular system. This modular approach requires an automation solution with flexible scalability in both hardware and software, which this Dutch company has found in PC-based control from Beckhoff.
Read more...Redefining motion control with Festo’s vision for seamless and intelligent automation Festo
Editor's Choice Electrical switching & drive systems & components
The quest for precision, flexibility and efficiency continues to shape the future of industrial automation, and Festo, as a long-standing leader in automation technology, stands firmly at the forefront of this movement, driving innovation and setting the benchmark for excellence.
Read more...The opportunity and impact of MEPS electric motor regulations WEG Africa
Editor's Choice Electrical switching & drive systems & components
South African companies are gearing up for the new Minimum Energy Performance Standards, part of a global trend towards energy-efficient electric motors.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version