Pneumatic systems & components


Long-term equipment hire is a cost-saver

2nd Quarter 2019 Pneumatic systems & components

Mines require a range of hire equipment from time to time. Precisely what equipment is needed depends on the type of mine. For instance on an open-pit mine, generators and lighting plant are most frequently hired. “Some of the mining contractors also use our high pressure diesel compressors for exploration as well as blast-hole drilling,” explains business development manager for long term rental, Henry Fourie.

On surface during shaft sinking, the mines use electric or diesel 1500 cfm machines. Once the mine is established, then Rand-Air is also capable of supplying air from surface for the underground mining operations to power rock drills of various types. “For this, a popular choice is the 1765 – 2119 cfm electric machines which we have supplied in various quantities, from as few as two units up to 10 units on a compressor bank,” he continues.

Rand-Air also has specially modified electric units for use underground. A major deep-level gold mine, for example, will have a two kilometre deep shaft down to a certain mine level. From the shaft, it can then be as far as a kilometre or more to the rock face where drilling is actually happening. Many older South African mines have been in existence for decades. Over time, the compressed air pipe systems have deteriorated, allowing air to escape and pressure to dissipate from numerous leaks before air actually reaches the driller.

Some of South Africa’s older mines also have surface compressors feeding air underground which have been operational for some time. With these compressors, there is a much greater chance of periodic failures which can take some time to repair. During these periods, hire compressors can play a cardinal role in keeping the mine operational.

Fourie explains that there is no given rental period, although the minimum is usually 12 months, which can be extended to some years. “We have one mining company on our books that has had long-term rental equipment from us for 12 years,” he continues.

Long-term rentals come with the benefit of a lower rate to the mine. With long term rentals, Rand-Air offers very favourable service level agreements which it takes pride in honouring. “Our rapid response times, which we take pride in meeting, form a key part of these agreements,” continues Fourie.

A further factor in favour of long-term rentals is that the mine does not have to employ skilled people specifically to service and maintain compressors or generators.

The challenge that faces Rand-Air with long-term rentals is that production pressures on mines are invariably immense and both men and machinery sometimes have to work in exceptionally harsh environments. However, with both short-term and long-term rentals, customers are always assured of a Rand-Air machine that will look and perform as well as a brand-new unit. Rand-Air service technicians are assiduous in supporting both short-term and long-term rentals. Should a customer ever experience difficulty with a rental unit, the Rand-Air staff member concerned is prepared to field calls from the mine – even in the middle of the night. If need be, after such a call, the sales representative will phone a technician on call who will immediately drive to the mine and rectify any issues.

In terms of any responsibility the mines have for Rand-Air’s hire equipment on a long-term rental, Fourie explains that apart from not intentionally damaging the machines they have none. “Rand-Air takes full responsibility for maintenance as we pride ourselves on our service levels, response times and knowledge of our equipment,” he explains. Depending on the number of machines on site, Rand-Air will have a dedicated staff member on site to ensure continuous faultless functioning of any hire equipment.

“Anyone who works in the mining environment will know what a challenging environment it is to meet demanding production targets,” adds Fourie. “So having someone to provide trouble-free compressed air, power or lighting benefits the mine in every way. Should the mine expand, and it needs more equipment, this is a phone call away without having to find additional capital first.

When this happens, we will give the mine a solution that is custom-made exactly to its requirements,” he says.

“There are many benefits to mines hiring equipment on a long-term basis. Ultimately, by looking to a third party to provide ancillary services, mining operations can conserve operational cash flow as well as capital. In the longer term, this promises the mining company a viable sustainable future with increased profitability horizons,” he concludes.

For more information contact, Henry Fourie, Rand-Air, +27 11 345 0700, [email protected], www.randair.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Siemens launches SIMATIC AX WinCC Unified Elements
Pneumatic systems & components Other technologies
New engineering tool speeds automation application development, reducing the time required to bring industrial projects to market and empowering automation engineers to build, manage version control, and deploy visualisation engineering projects

Read more...
High-performance linear guides
igus Pneumatic systems & components
igus continues its quest to replace traditional lubricated linear guides with its drylin polymer technology, which improves machine reliability. The absence of lubrication means it contributes to safer, cleaner operation with no risk of contamination.

Read more...
Air compressor secures premium meat company’s legacy
Pneumatic systems & components
A tailored ELGi compressed air solution from Integrated Air Solutions is helping Tulisa Meat Market protect six decades of quality and consistency in its premium meat production.

Read more...
Pneumatic solutions for versatility, operational safety and efficiency
Bearing Man Group T/A BMG Pneumatic systems & components
As an authorised partner of Festo, BMG combines access to globally recognised pneumatic technologies with local application expertise and technical support.

Read more...
Alternative fuels for cutting, brazing, soldering and heating
Pneumatic systems & components
Bolt and Engineering Distributors, as an authorised distributor for the Harris Products Group, is helping South African industries transition from acetylene to safer, more cost-effective alternative fuels for cutting, brazing, soldering and heating applications.

Read more...
Integrated Air Solutions opens Pinetown branch
Pneumatic systems & components
Integrated Air Solutions has opened a branch in Pinetown, bringing world-class diesel and electric air compressor services closer to customers in KwaZulu-Natal.

Read more...
How to clean compressed air effectively
Pneumatic systems & components
ISO-Reliability Partners has taken another step in bringing to market highly effective solutions to combat contamination in all its forms. The locally designed and patented Air Wizard inline water trap is proudly manufactured in South Africa. It has been SABS tested for the separation of water, oily fluids, rust and solid particulates from pneumatic compressed air or gas lines.

Read more...
Compressed air piping design
Artic Driers International Editor's Choice Pneumatic systems & components
When designing a compressed air pipeline, remember that size matters. The internal size of the pipe, along with the pressure and air volume, determine the velocity of the compressed air in the pipeline.

Read more...
Top questions about pressure gauges
SA Gauge Editor's Choice Pneumatic systems & components
Some questions never go out of date, and in our industry, a few have been asked for decades. At SA Gauge, we hear them every week. Here are the ten questions we hear most often, and the practical answers that can save time, money and frustration.

Read more...
Achieving clean and dry compressed air for faultless operation
Artic Driers International Pneumatic systems & components
Compressed air is an expensive source of motive power so it makes good sense to supply clean, dry compressed air to your distribution system.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved