New HVAC VSD launched
Second quarter 2006
Electrical switching & drive systems & components
LS Industrial Systems is offering its iP5A series of HVAC variable speed drives. The range is specifically designed to cater for building airconditioning systems and centrifugal pump installations, incorporating Metasys and other HVAC orientated protocols. A fan/pump speed reduction of 20% requires only 64% of the full speed load. Similarly, a fan speed reduction of 30% will require only 49% of the rated full speed load.
This square law characteristic makes the use of the standard VSDs uneconomical, as their output stages are designed to handle high overload currents. With the output stage typified for HVAC applications, a significant reduction in drive cost has been made possible. The new LS iP5A range includes all the sought-after protection including short-circuit proofing earth-leakage proofing (on the run), plastic coated circuit boards, etc.
Features such as multimotor control, enable the drive to control a pump station of up to five pumps, using analog level or pressure control, without the requirement of a PLC for pump switching and sequencing. Full PID control is a standard function, with either a local or a remote set-point value. As with all LS Industrial equipment, the iP5A range has been designed for a MTBF of 200 000 hours.
For more information contact Clive, Ana-Digi Systems, +27 (0) 11 658 1337, [email protected], www.anadigi.co.za
Further reading:
Precise detection of complex rotational movements
Beckhoff Automation
Electrical switching & drive systems & components
The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit - a gyroscope. This provides accurate detection of acceleration and rotational motion in addition to shock, vibration and tilt measurement, both as preprocessed values and as raw sensor data.
Read more...
Energy management system for electrohydrostatic actuation systems
Electrical switching & drive systems & components
In the machine manufacturing industry, more drive systems are being converted from servo-hydraulic throttle to electrohydrostatic actuation systems. The four-quadrant capability of the electrohydrostatic pump unit and servo drive used in this technology, in combination with the new Moog energy management system, allows regenerative power flows generated during braking or pressure relief to be stored and reused.
Read more...
Drive solution for stacker reclaimer
Electrical switching & drive systems & components
Hägglunds Drives South Africa recently completed a retrofit project on the bucket wheel of a stacker reclaimer at Richards Bay Coal Terminal. The project entailed replacing a gearbox drive solution with a direct drive solution from Hägglunds Drives SA.
Read more...
Kamoa-Kakula power pack order for SEW-EURODRIVE
SEW-EURODRIVE
Electrical switching & drive systems & components
With well over 100 units already delivered, SEW-EURODRIVE is set to continue supplying Ivanhoe Mines’ prestigious Kamoa-Kakula Copper Complex in the Democratic Republic of Congo.
Read more...
Seven ways to reduce production downtime on the plant
Electrical switching & drive systems & components
Production downtime is one of the biggest risks in the manufacturing industry. Follow these seven tips to reduce machine downtime in your production line.
Read more...
The time is now to implement a motor management strategy
Schneider Electric South Africa
Editor's Choice Electrical switching & drive systems & components
Motor management plays an all-important role in controlling motor energy costs in various industries, segments and applications. Research and practical experience have consistently shown that effective motor management practices can result in significant energy savings, reduced operational costs, and improved overall system reliability.
Read more...
Rapid overhaul of compressor motors
ACTOM
Electrical switching & drive systems & components
Marthinusen & Coutts Zambia was requested by a smelter based in the Copperbelt to provide an in-country repair solution for its two critical 4,5 MW compressor motors. The company was given only three weeks in which to overhaul and commission the motors.
Read more...
PC-based motion control on a labelling machine
Beckhoff Automation
Editor's Choice Electrical switching & drive systems & components
For 50 years, Bausch+Ströbel in Germany has been developing packaging and production systems for the pharmaceutical industries. The company’s goal is to offer the best technical and economical solutions for the challenges of modern industry. Its new ESA1025 labelling machine shows how this is achieved with PC-based control from Beckhoff as the central motion controller.
Read more...
Thrust for hybrid electric flying
Editor's Choice Electrical switching & drive systems & components
Several leading academic institutes in Germany are collaborating on the future of hybrid electric flying. The partners are researching an entirely new propulsion system for medium-range aircraft with up to 35 passengers.
Read more...
Precise knowledge for precise applications
Electrical switching & drive systems & components
Aerotech has been supplying standard product solutions such as motors, drives, controls and positioning tables since 1970. Customised motion subsystems include positioning systems on granite structures with undercarriage and vibration isolation, and also external measurement systems.
Read more...
printer friendly version