Electrical switching & drive systems & components


Motor management for Ex areas

First Quarter 2007 Electrical switching & drive systems & components

At only 62 mm wide, the ELR W3/9-500 MM unites an electronic reverse contactor combination with a motor protection trigger and three-phase active output monitoring for installations. The device is suitable for machines of up to approximately 4 kW. The EMM 3/5-500 MM device can be used for larger power outputs. Motor management devices protect installations and motors. This is accomplished by the fast active output measurement function, which can monitor a pump for dry-runs or blocked filters, for example. An error triggers an alarm or causes the drive to be switched off, thereby protecting the motor and the installation.

The ELR W3/9-500 MM and EMM 3/5-500 MM motor management devices can now be used for motors in the Ex area. Class AK4 according to DIN V19251, Category 3 according to EN954-1 and the EC type examination certificate according to ATEX have been confirmed by the PTB (national metrology institute) under PTB 03 ATEX 3114. A cycle test of the bimetal function is not required. The ability to integrate devices into Fieldbus systems such as Interbus and Profibus offers equipment availability at high safety levels, from the motor right through to the process control system.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Specialised heavy lifting and transport solutions for Singapore’s offshore island
Electrical switching & drive systems & components
A groundbreaking land reclamation project on an offshore island in Singapore has paved the way for the country’s first polder, reclaiming about 800 hectares of land.

Read more...
PC-based control for additive machine tools
Beckhoff Automation Editor's Choice Electrical switching & drive systems & components
IRPD is a specialist in additive machine tools. Development is heavily focused on high system throughput and consistently high process quality. This goal was achieved with the help of PC- and EtherCAT-based control and drive technology from Beckhoff.

Read more...
Major software release for Parker PSD servo drives
Parker Hannifin - Sales Company South Africa Electrical switching & drive systems & components
Parker Hannifin has released its PSD servo drive family delivering new control modes, advanced synchronisation functions and performance optimisations designed to improve throughput, accuracy and system efficiency in demanding industrial applications.

Read more...
Beckhoff expands economy drive system
Beckhoff Automation Electrical switching & drive systems & components
Beckhoff’s new AM1000 servomotor joins the company’s economy drive system. The compact, powerful motor and the AX1000 servo drive provide users with a perfectly coordinated, cost-optimised drive system.

Read more...
Moving next-generation monopiles
Electrical switching & drive systems & components
Wind turbine sizes are increasing at an unprecedented rate. The bigger the turbine, the more power it can generate and the fewer are needed per wind farm. Mammoet has been ahead of the curve in coming up with ways to make the movement of even XXL monopiles faster and more cost-effectively.

Read more...
PC-based control for flat wire motors for electric vehicles
Beckhoff Automation Electrical switching & drive systems & components
Special machine manufacturer, ruhlamat Huarui Automation Technologies has unveiled the second generation of its mass production line for flexible stators with bar winding (pins). This enables an extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.

Read more...
New generation surface drill rig
Electrical switching & drive systems & components
Epiroc South Africa is launching a new and improved PowerROC T45. This new generation surface drill rig offers increased fuel efficiency and high availability, and is a welcome addition to the PowerROC family.

Read more...
Coke drum integrity project at Canadian oil sands site
Electrical switching & drive systems & components
Mammoet supported a leading Canadian energy provider in Alberta’s oil sands with replacing its original eight coke drums.

Read more...
Rip-and-ship solution speeds up nuclear decommissioning project
Electrical switching & drive systems & components
When removing steam generators from decommissioned nuclear reactor buildings, the most economical method is to remove them in one piece. Mammoet was commissioned by Framatome to support with the removal of four steam generators from PreussenElektra’s Nuclear Power Plant Unterweser in Germany.

Read more...
Helping to solve wastewater challenges
Electrical switching & drive systems & components
KSB Pumps and Valves is doubling its efforts to help government and municipalities find practical and technical solutions to the growing wastewater challenges gripping large parts of the country.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved