1st Quarter 2019Electrical switching & drive systems & components
BMG’s range of Nord aluminium drives is available with the Sealed Surface Conversion System anti-corrosion treatment (nsd tupH, which has been developed by Nord Drivesystems for improved process reliability in extreme environmental conditions and for hygienically critical applications.
“Nord’s nsd tupH surface and corrosion protection system, which is resistant to acids and alkalis, is a highly efficient anti-corrosion treatment for gear units, smooth motors, frequency inverters and motor starters in washdown optimised cast aluminium housings,” explains Derrick Louw, Nord product specialist in BMG’s Electromechanical Division. “BMG’s Nord nsd tupH drive units are a robust alternative to painted geared motors or stainless steel versions. The nsd tupH catalytic surface treatment process permanently bonds a high hardness layer to the aluminium substrate to offer the same corrosion resistance as stainless steel. Advantages include extended surface life, a substantially lower mass, improved installation options and cost efficiency.
“Nord’s easy to clean surface treatment is not a coating like a paint layer, that can detach or flake off. This durable protective layer offers optimum protection against scratching, blistering and the penetration of corrosion, even if the unit is damaged. This surface conversion system is highly resistant to extreme environments and aggressive cleaning chemicals, even under high pressure washdown conditions.”
Nord drives with nsd tupH comply with FDA Title 21 CFR 175.300 and for this reason are suitable for food applications. They have been successfully tested according to ASTM D714 (blistering), ASTM D610-08 (corrosion), ASTM D1654-08 according to DIN EN ISO 2409 (scratching), ASTM B117-09 according to DIN EN ISO 9227 (salt spray test) and ASTM D3170 (Gravelometer). In addition, resistance to common cleaning agents used in the food industry has been confirmed in tests.
All DIN and standard components for the nsd tupH aluminium drive units, including drive shafts, are made from stainless steel. Fanless smooth motors, which run quietly, do not spread germs. They are available as synchronous and asynchronous motors and comply with efficiency classes IE2 and IE3 (asynchronous motors) and IE4 (synchronous motors).
Typical applications for Nord drives with nsd tupH surface treatment include the food and beverage industry, bottling and canning plants, water treatment and sewage plants, as well as offshore and onshore applications. This range is suitable for use in any plant that requires a washdown after production.
The Nord range, which is assembled locally by BMG according to stringent international quality and safety specifications, has earned recognition by the local market for reliability, high efficiency, reduced noise levels, extended service life and minimal maintenance requirements.
Precise detection of complex rotational movements Beckhoff Automation
Electrical switching & drive systems & components
The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit - a gyroscope. This provides accurate detection of acceleration and rotational motion in addition to shock, vibration and tilt measurement, both as preprocessed values and as raw sensor data.
Read more...Energy management system for electrohydrostatic actuation systems
Electrical switching & drive systems & components
In the machine manufacturing industry, more drive systems are being converted from servo-hydraulic throttle to electrohydrostatic actuation systems. The four-quadrant capability of the electrohydrostatic pump unit and servo drive used in this technology, in combination with the new Moog energy management system, allows regenerative power flows generated during braking or pressure relief to be stored and reused.
Read more...Drive solution for stacker reclaimer
Electrical switching & drive systems & components
Hägglunds Drives South Africa recently completed a retrofit project on the bucket wheel of a stacker reclaimer at Richards Bay Coal Terminal. The project entailed replacing a gearbox drive solution with a direct drive solution from Hägglunds Drives SA.
Read more...Kamoa-Kakula power pack order for SEW-EURODRIVE SEW-EURODRIVE
Electrical switching & drive systems & components
With well over 100 units already delivered, SEW-EURODRIVE is set to continue supplying Ivanhoe Mines’ prestigious Kamoa-Kakula Copper Complex in the Democratic Republic of Congo.
Read more...Seven ways to reduce production downtime on the plant
Electrical switching & drive systems & components
Production downtime is one of the biggest risks in the manufacturing industry. Follow these seven tips to reduce machine downtime in your production line.
Read more...The time is now to implement a motor management strategy Schneider Electric South Africa
Editor's Choice Electrical switching & drive systems & components
Motor management plays an all-important role in controlling motor energy costs in various industries, segments and applications. Research and practical experience have consistently shown that effective motor management practices can result in significant energy savings, reduced operational costs, and improved overall system reliability.
Read more...Rapid overhaul of compressor motors ACTOM
Electrical switching & drive systems & components
Marthinusen & Coutts Zambia was requested by a smelter based in the Copperbelt to provide an in-country repair solution for its two critical 4,5 MW compressor motors. The company was given only three weeks in which to overhaul and commission the motors.
Read more...PC-based motion control on a labelling machine Beckhoff Automation
Editor's Choice Electrical switching & drive systems & components
For 50 years, Bausch+Ströbel in Germany has been developing packaging and production systems for the pharmaceutical industries. The company’s goal is to offer the best technical and economical solutions for the challenges of modern industry. Its new ESA1025 labelling machine shows how this is achieved with PC-based control from Beckhoff as the central motion controller.
Read more...Thrust for hybrid electric flying
Editor's Choice Electrical switching & drive systems & components
Several leading academic institutes in Germany are collaborating on the future of hybrid electric flying. The partners are researching an entirely new propulsion system for medium-range aircraft with up to 35 passengers.
Read more...Precise knowledge for precise applications
Electrical switching & drive systems & components
Aerotech has been supplying standard product solutions such as motors, drives, controls and positioning tables since 1970. Customised motion subsystems include positioning systems on granite structures with undercarriage and vibration isolation, and also external measurement systems.
printer friendly version