Energy efficient drives for the mining industry
1 October 2020
Electrical switching & drive systems & components
The mining and minerals industry presents some of the most challenging environments for production. Mine sites, mineral processing facilities, associated stockyards, and port facilities are large in scale and are often located in remote locations. The industry is a major consumer of energy and is responsible for more than 40% of total industrial energy use in this country. In sub-Saharan Africa almost 50% of energy-intensive users in South Africa are the mines.
The fundamentals of AC variable frequency speed drive technology are the same, but many elements are rapidly changing towards a more sustainable and environmentally friendly mining future. Increasingly, software is embedded in today’s mine processing components, offering new functionalities and enabling the AC drive to play a larger role in the processing plant.
“Conventionally, motors run at a fixed speed, regardless of actual output requirement, wasting a tremendous amount of energy. Energy output use can be reduced by 60% by controlling motors with electrical variable speed drives,” says Stephen Brown, mining accounts and business development manager, Turkey Middle East & Africa, for Danfoss Drives.
New motor types are appearing, placing additional demands on motor-drive control. This in turn means that the AC drive needs to be able to control an expanding variety of motor types, without burdening the end user with more complexity. In addition, new energy efficiency requirements lead to more variable speed applications.
There are AC drives designed for the needs of mining and mineral processing plants, coping with extreme conditions, heavy loads and controlling equipment installed a long distance away. No matter how well the plant design has been optimised, there is always a way to drive down costs even further. AC drives are used extensively for this purpose, extending equipment lifetime, optimising processes, reducing maintenance and saving energy costs.
All Danfoss Drives greater than 90 kW incorporate a back-channel cooling design, with separate cooling paths between these two paths or the power components, control electronics and an IP54 seal. This back-channel cooling removes approximately 85-90% of the power loss directly through the heat sink, leaving only 10-15% of the total loss dissipated in the switch room.
Consideration has to be given to the outside air quality. If it is suitable, the heat sink cooling fans with appropriate mounting and ducting, and filtered external air at temperatures of up to 50°C, can be used to exhaust approximately 85-90% of the heat loss from these VSDs directly outside the switch room, without affecting the switch room pressurisation. The switch room air conditioning system only needs to be sized for the remaining 10-15% losses. Utilising this feature can dramatically reduce the air conditioning requirements of the switch rooms and provide significant project cost savings compared to VSDs without such a design feature.
In response to this need for energy efficient technology, Danfoss South Africa is presenting a series of informative webinars at the end of October, geared towards mining engineers, specifiers, buyers, mining houses and investors. These interactive webinars will enable mining experts and learners to think differently about their current energy usage and how the right drives can bring energy cost savings.
These are the dates and times for registration:
23rd September 09:30 CAT https://attendee.gotowebinar.com/register/1723706986600731152
27th October 08:30 CAT https://attendee.gotowebinar.com/register/398985690642486800
27th October 18:00 CAT https://attendee.gotowebinar.com/register/4310106880316163856
28th October 11:00 CAT https://attendee.gotowebinar.com/register/8190429649784196368
24th November 09:30 CAT https://attendee.gotowebinar.com/register/2015984665054629392
Further reading:
Precise detection of complex rotational movements
Beckhoff Automation
Electrical switching & drive systems & components
The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit - a gyroscope. This provides accurate detection of acceleration and rotational motion in addition to shock, vibration and tilt measurement, both as preprocessed values and as raw sensor data.
Read more...
Energy management system for electrohydrostatic actuation systems
Electrical switching & drive systems & components
In the machine manufacturing industry, more drive systems are being converted from servo-hydraulic throttle to electrohydrostatic actuation systems. The four-quadrant capability of the electrohydrostatic pump unit and servo drive used in this technology, in combination with the new Moog energy management system, allows regenerative power flows generated during braking or pressure relief to be stored and reused.
Read more...
Drive solution for stacker reclaimer
Electrical switching & drive systems & components
Hägglunds Drives South Africa recently completed a retrofit project on the bucket wheel of a stacker reclaimer at Richards Bay Coal Terminal. The project entailed replacing a gearbox drive solution with a direct drive solution from Hägglunds Drives SA.
Read more...
Kamoa-Kakula power pack order for SEW-EURODRIVE
SEW-EURODRIVE
Electrical switching & drive systems & components
With well over 100 units already delivered, SEW-EURODRIVE is set to continue supplying Ivanhoe Mines’ prestigious Kamoa-Kakula Copper Complex in the Democratic Republic of Congo.
Read more...
Seven ways to reduce production downtime on the plant
Electrical switching & drive systems & components
Production downtime is one of the biggest risks in the manufacturing industry. Follow these seven tips to reduce machine downtime in your production line.
Read more...
The time is now to implement a motor management strategy
Schneider Electric South Africa
Editor's Choice Electrical switching & drive systems & components
Motor management plays an all-important role in controlling motor energy costs in various industries, segments and applications. Research and practical experience have consistently shown that effective motor management practices can result in significant energy savings, reduced operational costs, and improved overall system reliability.
Read more...
Rapid overhaul of compressor motors
ACTOM
Electrical switching & drive systems & components
Marthinusen & Coutts Zambia was requested by a smelter based in the Copperbelt to provide an in-country repair solution for its two critical 4,5 MW compressor motors. The company was given only three weeks in which to overhaul and commission the motors.
Read more...
PC-based motion control on a labelling machine
Beckhoff Automation
Editor's Choice Electrical switching & drive systems & components
For 50 years, Bausch+Ströbel in Germany has been developing packaging and production systems for the pharmaceutical industries. The company’s goal is to offer the best technical and economical solutions for the challenges of modern industry. Its new ESA1025 labelling machine shows how this is achieved with PC-based control from Beckhoff as the central motion controller.
Read more...
Thrust for hybrid electric flying
Editor's Choice Electrical switching & drive systems & components
Several leading academic institutes in Germany are collaborating on the future of hybrid electric flying. The partners are researching an entirely new propulsion system for medium-range aircraft with up to 35 passengers.
Read more...
Precise knowledge for precise applications
Electrical switching & drive systems & components
Aerotech has been supplying standard product solutions such as motors, drives, controls and positioning tables since 1970. Customised motion subsystems include positioning systems on granite structures with undercarriage and vibration isolation, and also external measurement systems.
Read more...
printer friendly version