Classified as hazardous areas, offshore oil rigs require that any equipment installed on them is designed and certified accordingly – including electric motors to drive critical gas compressors.
Foster Yeboah, Zest WEG’s regional sales manager for the West African Region, says that WEG electric motors for these applications comply with IEC standards and associated hazardous area specifications, which certify equipment for use in ‘explosive atmospheres’. Considering the hazardous marine environment, all the WEG machines were supplied with tough epoxy paint and conformed to an IP65 rating.
Six large WEG motors are being installed on an oil platform off the coast of Ghana, over a staggered schedule from late 2020 through 2022.
Four of the new motors are large 9500 kW, WEG MGW800 machines, and two are 7000 kW MGW710 machines. With weights of up to 23 tons, these electric motors exceeded the 19 ton weight limit of the oil platform’s crane, which meant that the motors were shipped to site in component form for assembly on site.
“Despite COVID-19 disruptions and challenging logistical conditions, Zest WEG is successfully supplying, testing and installing these motors for the customer,” says Yeboah. “These six WEG motors are upgrades of previously installed WEG motors, which have been operating successfully on this site for over a decade. Of course, the Factory Acceptance Test (FAT) is always vital, so this has to be conducted on all the motors after they are manufactured and tested. COVID-19 initially made it impossible for the client to be physically present at the factory in Brazil, so some tests were witnessed virtually.”
He explains that to deal with the weight restriction of the crane on site, the electric motors then had to be dismantled in the factory before shipping. Rather than being shipped as a single unit – as is normally done – the motors were carefully packaged into component form. Particular care had to be taken with protecting the rotor during shipment.
“The rotor is a critical item, and it is crucial that great care is taken when transporting this item,” he says. “The packages are then shipped and stored at the customer’s warehouse in Ghana, before being taken to the offshore oil rig.”
Zest WEG technicians assemble the electric motors on the oil platform, including the various electrical and hydraulic connections and piping. Commissioning and testing are done before the system goes online. The first of the six installations had to be done when COVID-19 restrictions required quarantining periods – adding to the complexity of planning.
The large WEG motors in this application are cooled using the IC81W air-water cooling principle. Air is circulated through the motor base where the rotor and stator generate the most heat. A heat exchanger then extracts the heat from the internal circuit air flowing through it.
Precise detection of complex rotational movements Beckhoff Automation
Electrical switching & drive systems & components
The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit - a gyroscope. This provides accurate detection of acceleration and rotational motion in addition to shock, vibration and tilt measurement, both as preprocessed values and as raw sensor data.
Read more...WEG partners with Panaco in the DRC Zest WEG Group Africa
Editor's Choice News & events
The strengthened presence of WEG in the Democratic Republic of Congo (DRC), through its strategic alliance with ts value-added reseller (VAR) Panaco, has proved to be highly successful.
Read more...Energy management system for electrohydrostatic actuation systems
Electrical switching & drive systems & components
In the machine manufacturing industry, more drive systems are being converted from servo-hydraulic throttle to electrohydrostatic actuation systems. The four-quadrant capability of the electrohydrostatic pump unit and servo drive used in this technology, in combination with the new Moog energy management system, allows regenerative power flows generated during braking or pressure relief to be stored and reused.
Read more...Drive solution for stacker reclaimer
Electrical switching & drive systems & components
Hägglunds Drives South Africa recently completed a retrofit project on the bucket wheel of a stacker reclaimer at Richards Bay Coal Terminal. The project entailed replacing a gearbox drive solution with a direct drive solution from Hägglunds Drives SA.
Read more...Kamoa-Kakula power pack order for SEW-EURODRIVE SEW-EURODRIVE
Electrical switching & drive systems & components
With well over 100 units already delivered, SEW-EURODRIVE is set to continue supplying Ivanhoe Mines’ prestigious Kamoa-Kakula Copper Complex in the Democratic Republic of Congo.
Read more...Seven ways to reduce production downtime on the plant
Electrical switching & drive systems & components
Production downtime is one of the biggest risks in the manufacturing industry. Follow these seven tips to reduce machine downtime in your production line.
Read more...The time is now to implement a motor management strategy Schneider Electric South Africa
Editor's Choice Electrical switching & drive systems & components
Motor management plays an all-important role in controlling motor energy costs in various industries, segments and applications. Research and practical experience have consistently shown that effective motor management practices can result in significant energy savings, reduced operational costs, and improved overall system reliability.
Read more...Rapid overhaul of compressor motors ACTOM
Electrical switching & drive systems & components
Marthinusen & Coutts Zambia was requested by a smelter based in the Copperbelt to provide an in-country repair solution for its two critical 4,5 MW compressor motors. The company was given only three weeks in which to overhaul and commission the motors.
Read more...PC-based motion control on a labelling machine Beckhoff Automation
Editor's Choice Electrical switching & drive systems & components
For 50 years, Bausch+Ströbel in Germany has been developing packaging and production systems for the pharmaceutical industries. The company’s goal is to offer the best technical and economical solutions for the challenges of modern industry. Its new ESA1025 labelling machine shows how this is achieved with PC-based control from Beckhoff as the central motion controller.
Read more...Thrust for hybrid electric flying
Editor's Choice Electrical switching & drive systems & components
Several leading academic institutes in Germany are collaborating on the future of hybrid electric flying. The partners are researching an entirely new propulsion system for medium-range aircraft with up to 35 passengers.
printer friendly version