BMG’s new NORD MAXXDRIVE-XT industrial gearboxes, which were launched at the Electra Mining trade show last year, have been well received by leaders in bulk logistics, particularly for use in belt conveyor systems.
MAXXDRIVE-XT industrial gear units − developed by NORD DRIVESYSTEMS to meet the demands of conveyor technology drives used in the handling of bulk goods and minerals – have advanced features for high thermal and mechanical load capacities, durability for extended service life, and low maintenance requirements.
“The power and speed ranges of the two-stage right-angle gear units have been specially designed for industries that require low speed ranges, in combination with high powers,” explains national sales manager, Deon Crous. “Our drive solutions are individually configured for customers according to the modular principle, which is based on a wide range of frequency inverters, motors, and gear units, together with coupling and brake systems − each with various options.”
Features include hydraulic couplings that are tailored for a particular process and Taconite seals, which protect radial shaft seals against abrasive dust and corrosion to ensure smooth operation and low maintenance requirements, even in tough operating conditions. Large roller bearings and centre distances increase the load capacity of the system and extend the service life of components.
The standard industrial gear unit is equipped with a heavily ribbed UNICASE housing and an integrated axial fan. Due to the increased surface and airflow covers, the cooling airflow is optimised and a high thermal limiting power is achieved. In many cases, additional cooling is not required.
MAXXDRIVE XT units, which provide output torques of 15 to 75 kNm, with speed ratios from 6,3 to 22,4, are available from BMG in seven sizes for powers from 22 to 2100 kW.
Customised explosion-protected motors and geared motors are used to minimise the risk of an explosion of flammable dust in bucket conveyor applications.
BMG also supplies and supports NORD MAXXDRIVE-XD industrial gear units, which have been designed to enhance the efficiency of lifting gear used in many industries.
NORD MAXXDRIVE XD industrial gears offer solutions in lifting applications that place great demands on limited installation space for drives. This system has an increased centre distance that is ideally suited to the U-shaped configuration of the drive, motor and cable drum used in lifting equipment in all kinds of cranes.
The housing of the MAXXDRIVE XD gear units has been specially designed for lifting applications and optimised for downward loads. The elongated arrangement of gear stages also enables a mechanical tailormade dimensioning of the gear unit with sufficient centre distance – thereby avoiding over-dimensioning.
MAXXDRIVE XD industrial gear units are suitable for use in mining and quarrying, ports, logistics and shipyards, in metal, chemical and paper facilities, and for bulk goods trans-shipment.
With the launch of these new industrial gearboxes, BMG is able to offer a complete package of running gear and lifting gear drives for cranes from a single source.
BMG’s team of technicians supports the NORD range with a technical advisory and support service, which is tailored to meet the precise specifications of contractors, designers and the end user. Local assembly, at BMG World in Johannesburg, enables prompt delivery of drive systems and the quick availability of spare parts.
BMG’s recently launched MAXXDRIVE XT industrial gear units, with high thermal and mechanical load capacities, are tailored to applications where high powers, with low speed ratios, are required.
Precise detection of complex rotational movements Beckhoff Automation
Electrical switching & drive systems & components
The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit - a gyroscope. This provides accurate detection of acceleration and rotational motion in addition to shock, vibration and tilt measurement, both as preprocessed values and as raw sensor data.
Read more...Energy management system for electrohydrostatic actuation systems
Electrical switching & drive systems & components
In the machine manufacturing industry, more drive systems are being converted from servo-hydraulic throttle to electrohydrostatic actuation systems. The four-quadrant capability of the electrohydrostatic pump unit and servo drive used in this technology, in combination with the new Moog energy management system, allows regenerative power flows generated during braking or pressure relief to be stored and reused.
Read more...Drive solution for stacker reclaimer
Electrical switching & drive systems & components
Hägglunds Drives South Africa recently completed a retrofit project on the bucket wheel of a stacker reclaimer at Richards Bay Coal Terminal. The project entailed replacing a gearbox drive solution with a direct drive solution from Hägglunds Drives SA.
Read more...Kamoa-Kakula power pack order for SEW-EURODRIVE SEW-EURODRIVE
Electrical switching & drive systems & components
With well over 100 units already delivered, SEW-EURODRIVE is set to continue supplying Ivanhoe Mines’ prestigious Kamoa-Kakula Copper Complex in the Democratic Republic of Congo.
Read more...Seven ways to reduce production downtime on the plant
Electrical switching & drive systems & components
Production downtime is one of the biggest risks in the manufacturing industry. Follow these seven tips to reduce machine downtime in your production line.
Read more...The time is now to implement a motor management strategy Schneider Electric South Africa
Editor's Choice Electrical switching & drive systems & components
Motor management plays an all-important role in controlling motor energy costs in various industries, segments and applications. Research and practical experience have consistently shown that effective motor management practices can result in significant energy savings, reduced operational costs, and improved overall system reliability.
Read more...Rapid overhaul of compressor motors ACTOM
Electrical switching & drive systems & components
Marthinusen & Coutts Zambia was requested by a smelter based in the Copperbelt to provide an in-country repair solution for its two critical 4,5 MW compressor motors. The company was given only three weeks in which to overhaul and commission the motors.
Read more...PC-based motion control on a labelling machine Beckhoff Automation
Editor's Choice Electrical switching & drive systems & components
For 50 years, Bausch+Ströbel in Germany has been developing packaging and production systems for the pharmaceutical industries. The company’s goal is to offer the best technical and economical solutions for the challenges of modern industry. Its new ESA1025 labelling machine shows how this is achieved with PC-based control from Beckhoff as the central motion controller.
Read more...Thrust for hybrid electric flying
Editor's Choice Electrical switching & drive systems & components
Several leading academic institutes in Germany are collaborating on the future of hybrid electric flying. The partners are researching an entirely new propulsion system for medium-range aircraft with up to 35 passengers.
Read more...Precise knowledge for precise applications
Electrical switching & drive systems & components
Aerotech has been supplying standard product solutions such as motors, drives, controls and positioning tables since 1970. Customised motion subsystems include positioning systems on granite structures with undercarriage and vibration isolation, and also external measurement systems.
printer friendly version