Bearings result in huge savings
First Quarter 2020
Shaft power components
After experiencing ongoing problems with the bearings on a vital milling machine at a steel plant, the management team turned to NSK for a solution. This decision proved to be extremely beneficial, with the steel mill now enjoying annual savings of €35 600.
The steel mill produces rails for lift equipment that require the machining of two flat areas at the ends, which assist the fitting of the rails during assembly. While the time required to mill these rough surfaces is short, the stiffness of the machine’s spindle is critical due to the length of the rails. However, using the milling machine’s original bearings, the steel plant noticed that spindle stiffness reduced after just three months, making it necessary to change the spindle assembly, including motors.
Faced with a recurring and expensive situation, NSK was asked to find a solution. Expert NSK engineers visited the plant and analysed the spindle design as part of its AIP Added Value Programme. Calculations were made based on the use of tooling expected to deliver high cutting capacity and withstand high loads. Engineers also inspected the failed bearings and checked the wear bands of the raceways.
Following their analysis, NSK’s engineers recommended that the spindle be redesigned with a four row bearing set, instead of three, thus increasing the radial load capacity and radial stiffness. The contact angle was also changed from 15° to 25° to increase the bending stiffness of the shaft. NSK’s high precision angular contact ball bearings (ACBB) were selected from its range of standard products.
The NSK high precision ACBB series is manufactured to conform to ISO standards. A choice of three contact angles, two cage designs and two types of ball material is available to suit application requirements.
After the steel mill had implemented the change, the bearings continued working in the milling machine for more than a year, with no failures experienced in the motor or transmission. Indeed, a full report was produced by NSK to verify the improved characteristics, detailing the enhanced bending stiffness of the shaft and extended operating life from three months to over a year.
When comparing the costs from before and after the adoption of NSK bearings, the savings are clear to see. Today, the steel mill no longer has to endure four production stops a year, while the costs for the replacement spindle assemblies and motors have also been eliminated. Taking these factors into account, it has been calculated that the plant is saving €35,600 per annum.
Further reading:
Innovative sealing and bearing solution for pulp machine
SKF South Africa
Shaft power components
A leading South African manufacturer of paper-making equipment sought to modify an existing pulp machine and turned to trusted partner SKF to assist with the redesign of a critical sealing arrangement.
Read more...
Polymer bearings for maintenance-free bottling system
igus
Shaft power components
A favourite South African beer which is to be found on many a beer connoisseur’s table is being brewed in Belgium with the assistance of lubricant-free polymer bearings that will not contaminate the beer.
Read more...
Flexible, lightweight disc couplings for advanced industrial performance
Bearing Man Group T/A BMG
Shaft power components
BMG has expanded its extensive portfolio of quality branded couplings with the introduction of the ESCODISC FIL series, a new generation of flexible, lightweight disc couplings.
Read more...
Industrial valve solutions
Bearing Man Group T/A BMG
Shaft power components
BMG’s Fluid Technology division supplies and supports an extensive range of components for fluid technology systems. These include valves, hydraulic hoses and fittings, accumulators, cylinders, heat exchangers, hydraulic motors and hydraulic plumbing, as well as pumps and reservoir accessories.
Read more...
Direct-controlled seat valve
Shaft power components
A new direct-controlled seat valve enables storage-free, load-tight holding functions in dynamic linear units without an additional control pressure supply, and offers significant advantages over classic, pilot-controlled solutions, particularly in stationary and servo hydraulics.
Read more...
Wind energy in the Black Forest
Shaft power components
For more than 20 years, numerous wind turbines have stood in the Black Forest and are now receiving a performance boost through repowering projects.
Read more...
The advantages of using an adjustable cable gland
Shaft power components
Pratley continues to demonstrate its engineering leadership with its innovative adjustable cable gland, designed to significantly reduce maintenance and labour costs across a wide range of industrial applications.
Read more...
Advanced tensioning solutions for industrial applications
Shaft power components
OST-Africa has developed an advanced range of tensioning elements, designed to meet the demands of mechanical power transmission
Read more...
Single DDI cable solution simplifies connectivity
SEW-EURODRIVE
Shaft power components
Cabling can be one of the most challenging aspects of automation and drive system installations, often leading to delays, faults and inefficiencies. SEW-EURODRIVE offers a solution that simplifies connectivity, its innovative Digital Data Interface technology combined with a single cable system.
Read more...
The critical role of check valves
Parker Hannifin - Sales Company South Africa
Shaft power components
In fluid power systems, the performance and reliability of the entire operation often hinge on components that are small in size but significant in function. Among these, the check valve stands out as a fundamental yet frequently overlooked element.
Read more...
printer friendly version