This IO-Link cylinder sensor from ifm, with two configurable hardware outputs, will upgrade your machine in no time. The outputs can be configured to your application requirements. A high-resolution process value with a detection range of 50 mm enables continuous monitoring and digital transmission via IO-Link. Thanks to the teach function and the Bluetooth adaptor, the installed sensor can be easily adjusted from outside the machine.
Integrated diagnostic functions
Combined functions, such as the stroke counter (switching cycle counter), time monitoring between both end positions, or device temperature, provide servicing assistance and enable maintenance to be carried out as required.
In general
Cylinder sensors are used for position detection of pistons in pneumatic cylinders. They are directly mounted onto the cylinder. The ring magnet attached to the piston is sensed through the housing wall of non-magnetisable material (e.g., aluminium, brass or stainless steel). They can be fixed to almost any T-slot, C-slot, clean-line, tie rod, integrated profile or trapezoidal slot cylinder.
Achieving clean and dry compressed air for faultless operation Artic Driers International
Pneumatic systems & components
Compressed air is an expensive source of motive power so it makes good sense to supply clean, dry compressed air to your distribution system.
Read more...Controlling pneumatics via IO-Link ifm - South Africa
Pneumatic systems & components
Pneumatic airboxes control cylinders or actuators using compressed air, and are found in a wide range of industrial applications.
Read more...The role of analogue gauges in a digital world SA Gauge
Pneumatic systems & components
With so much focus on digital systems, remote monitoring and automation, it’s easy to assume that traditional analogue gauges are outdated. Yet in almost any plant, mine or processing facility, you’ll still find them in daily use. There’s a good reason for this.
Read more...It’s full steam ahead for SKF’s sustainable leak detection solution SKF South Africa
Pneumatic systems & components
One of SKF’s key customers based in Cape Town, which depends on steam systems for its production processes, was facing costly challenges related to high energy consumption and excessive maintenance hours. SKF recommended the TKSU 10 ultrasonic leak detector as a more streamlined, user-friendly alternative.
Read more...Dynamic compressor control system with energy savings
Pneumatic systems & components
CompAir has launched Ecoplant, a dynamic, compressed air management solution that adjusts compressor parameters in real time, offering up to 30 per cent reductions in energy costs and CO2 emissions.
Read more...Is your compressed air system sustainable? Artic Driers International
Pneumatic systems & components
We are all aware that compressed air is an expensive source of motive power, but do we actually know what the cost is?
Read more...It’s full steam ahead for SKF’s sustainable leak detection solution SKF South Africa
Pneumatic systems & components
One of SKF’s key customers based in Cape Town, which depends on steam systems for its production processes, was facing costly challenges related to high energy consumption and excessive maintenance hours. SKF recommended the TKSU 10 ultrasonic leak detector as a more streamlined, user-friendly alternative.
Read more...A guide for compressed air dryer selection Artic Driers International
Pneumatic systems & components
Clean and dry compressed air is essential in today’s modern operating environment. Without an air dryer and filter bank in line, the downtime created by condensate can be substantial. However, there are issues about air dryer selection and the impact of geographic location that need careful consideration prior to placing an order.
Read more...Easy to use energy management tool for compressed air Comtest
Pneumatic systems & components
For the efficient management of plant operations, the critical considerations include product quality, safety, downtime, and energy use. A production plant in Germany has set a greenhouse gas emissions reduction goal of 25% by 2030, and turned to the Plant Energy manager to help deliver that target.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version