Electrical switching & drive systems & components


Safe handling in all sectors

Third Quarter 2024 Electrical switching & drive systems & components

This initiative ensures that appropriate measures are taken to prevent roll back incidents, which might cause injury to workers during conveying operations. BMG technical experts advise on the selection of the correct cam clutch for each application, and assist with proper installation methods to ensure optimum performance and improved safety standards.

“Tsubaki backstops and cam clutches, which have been developed and manufactured in Japan for high efficiency and optimum safety in high- or low-speed applications, meet the requirements of current legislation,” explains business unit manager, Carlo Beukes. Local safety regulations require that the installation of incline conveyor belts must include the fitting and use of one or more devices to prevent run-back or run-on, to prevent injury by materials falling from a conveyor belt.

Tsubaki backstop cam clutches are designed to prevent reverse rotation of drive shafts, offering a simple and cost-effective means to protect capital equipment and enhance safety. Apart from the mining sector, BMG’s cam clutches are used for belt conveyors for materials handling, metals, timber, pulp and wood chip, and also for bucket elevators for cement and grain. These units are also installed to enhance performance of large drift conveyors and screw pumps.

Tsubaki cam clutches are available from BMG in different capacities and styles, and are designed to provide the best functional characteristics for three basic modes of operation – overrunning, indexing, and backstopping. The outer and inner races of these cam clutches are manufactured from high-quality alloy steel, with high surface hardness and core toughness, to withstand operation in arduous conditions. These races are precision ground, providing excellent concentricity and a special surface finish to obtain accurate cam rotation. Cams are manufactured from special selected high-alloy steel, with a hardness option up to 2500 Hv.

A key range in BMG’s portfolio of Tsubaki cam clutches is the BS-F series, which is suitable for high-speed inclined and long overland belt conveyors and bucket elevators used in the mining and bulk handling sectors. The high-torque, high-speed Tsubaki BS-F series, with a narrow width I-beam torque arm, is a drop-in replacement to conventional ‘roller ramp’ devices. This allows for quick and easy onsite installation and enables effortless replacement of an old backstop with the new BS-F design, without the need for modification to the existing layout. Although this series has a narrower width than other models, the downsized unit exceeds the requirements of high-speed inclined belt conveyors, with the benefits of space saving and reduced installation time.

Important features of this series include a non-rollover cam and roller design, which offers higher backstop torque capacities and lower running temperatures than conventional anti-rollback devices. Added to this, a flexible labyrinth seal mechanism prevents the ingress of dust and water in abrasive conditions, and a double-lip oil seal with multi-temperature grease, enables safe operation at a wide ambient temperature range from -55 to 150°C.

A common cause of conventional backstop failure is oil leakage. Tsubaki has eliminated this risk in the BSF series by designing the backstop to operate with grease and a specially designed labyrinth seal. The absence of an oil level gauge creates a more reliable safety device. For extended service life, correct lubrication methods and dust prevention care are critical. BMG recommends the use of a maintenance kit and Tsubaki-approved EP-free grease for easy and effective maintenance of the BSF series. The BS-Grease is available from any BMG branch.

The cam and roller cage orbit at low speed, continually conveying grease internally from the bottom to the top of the mechanism. The constant circulation of grease minimises internal friction, and reduces operating temperature for dependable operation. Maintenance intervals are between 7500 and 8000 hours, and the effective service life of the units is also significantly extended, compared with conventional oil-filled units.

For extended service life, correct lubrication methods and dust prevention care are critical. BMG recommends the use of a maintenance kit and Tsubaki-approved EP-free grease for easy and effective maintenance of the BSF series.

BMG has made a substantial investment in local Tsubaki backstops to ensure speedy delivery. This is a major advantage, as the current industry norm is up to 24 weeks delivery. The complete range of Tsubaki power transmission components is available from BMG’s national branch network, which offers a technical advisory and 24-hour backup service.

For more information contact Carlo Beukes, BMG, +27 11 620 7558, carlob@bmgworld.net, www.bmgworld.net


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Hydraulic pumps deliver high flow, convenience and precision
Bearing Man Group T/A BMG Hydraulic systems & components
BMG’s range of high-performance hydraulic electric Enerpac E-pulse pumps is critical to all 700 bar operating hydraulic systems. These portable E-pulse pumps have intelligent auto-cycle functionality and an efficient power-to-weight ratio to ensure dependable operation and high productivity in challenging industrial applications.

Read more...
The importance of original branded bolt securing products
Bearing Man Group T/A BMG Shaft power components
BMG is concerned about the proliferation of counterfeit merchandise, and the dangers associated with using inferior goods.

Read more...
Advanced solutions for valves
Bearing Man Group T/A BMG Shaft power components
BMG delivers state-of-the-art valve solutions to diverse industries across Africa, in collaboration with InterApp, a global leader in the design and manufacture of high-quality valves.

Read more...
Innovative separation of recyclable materials with PC-based control
Beckhoff Automation Electrical switching & drive systems & components
A plant built by Belgian specialist machine builder, Absolem Engineering features an innovative process for separating recyclable materials. Using PC-based control from Beckhoff, a major problem has been elegantly solved - the generation of different signal sequences for the exact synchronisation of different camera systems.

Read more...
Understanding standby, prime and continuous gensets
WEG Africa Electrical switching & drive systems & components
The increasing reliance of South African businesses on generator sets to mitigate power disruptions highlights a crucial need for proper selection based on specific operational demands. Despite their growing usage, there is still widespread confusion about how to choose the appropriate genset, often leading to inefficient and costly decisions.

Read more...
PC-based control for advanced hydrogen storage technology
Beckhoff Automation Editor's Choice Electrical switching & drive systems & components
The proportion of renewable energies from solar, wind and water is rising continuously. However, sufficient storage options are of the essence to use these energies as efficiently as possible. GKN Hydrogen offers a particularly compact and safe option, low-pressure metal hydride hydrogen storage systems with PC-based control from Beckhoff.

Read more...
Axiom reaches new heights
Axiom Hydraulics Editor's Choice Electrical switching & drive systems & components
When Rula Bulk Handling could not source a cable tensioner large enough for a new cableway, the engineers knew they had to come up with an inventive solution. After discovering that no such tensioner was immediately available, Rula approached Axiom Hydraulics and ifm to assist with building their own.

Read more...
Local range of planetary units
SEW-EURODRIVE Electrical switching & drive systems & components
As SEW-EURODRIVE South Africa actively extends its offerings to customers, the SEW PPK and SEW P2.e industrial gearbox ranges are good examples of solutions that are well suited to the local business environment.

Read more...
At least 60 million strokes
Horne Technologies Editor's Choice Electrical switching & drive systems & components
Designing and constructing compact automation systems is one of the core activities of the Austrian machine manufacturer, STIWA. Its modular LTM-CI system has been optimised for small parts assembly. Linear and rotating micromotors from Faulhaber perform key tasks in these systems.

Read more...
Innovative five-axis laser precession scanner
Electrical switching & drive systems & components
Motion control specialist, Aerotech has launched the AGV5D, an innovative five-axis laser precession scanner specially developed for laser micromachining. This makes it possible to create high-precision bores, contoured slots and other complex geometries with dimensional tolerances in the sub-micrometre range.

Read more...