classic | mobile



Retrospective digitalisation
4th Quarter 2018, Other technologies

According to the Annual Manufacturing Report, 2018, four in five manufacturers believe that smart factory technologies will improve their supply chain relationships. The proposed benefits of data collection from smart sensors are huge, but some manufacturers still feel that a smart factory is out of their reach.

Nick Boughton, digital lead at systems integrator, Boulting Technology explains how plants with legacy equipment can retrospectively upgrade their facility to a smart factory.

Plants across a wide range of industry sectors worldwide contain an abundance of legacy equipment. Particularly in industries with high turnover of low margin products, such as food and beverage, plant managers may not perceive themselves to have the budget to upgrade equipment, or the time to shut down a section of the production line for installation.

The legacy equipment that remains can cause a multitude of issues, including lack of service and support from manufacturers and an increased risk of breakdown as equipment ages. Each of these are complicated by obsolescent equipment and difficulty getting hold of the parts needed for repair.

However, in many plants these risks are well managed and so the equipment, alongside its related historical data, is essential.

Being smart

Plant managers may accept that machinery can’t be upgraded, but this does not mean they shouldn’t explore the benefits of the smart factory and connected technology, including predictive maintenance, productivity improvements and quality control.

The ageing legacy equipment was likely not built with connectivity in mind and there is simply no way to connect it to the existing industrial network. Despite making financial investments when purchasing equipment, there is no reason to believe you can’t upgrade a plant to make it more intelligent.


A wide range of industrial automation suppliers are now offering add-on solutions that can provide these benefits. A ‘black box’, which can be installed alongside existing, isolated, equipment can integrate it with the network, allowing the box to read and communicate data from the machine without any changes to existing hardware or software.

In addition, software within the system can allow for visualisation of performance metrics, making it easy for plant managers to identify targets for improvements allowing the system to run more efficiently.

Although each box is different, the overall concept remains the same. A controller collects runtime data via I/O or fieldbus protocols before using software to process it with no need for changes to existing equipment or analysis. This allows for easier and more in-depth monitoring of processes as well as energy consumption. Collating the data from multiple pieces of equipment gives an overall interactive visual of the plant, allowing for real-time monitoring.

This can also be integrated with a predictive maintenance schedule, as the data produced highlights potential breakdowns before they happen. For example, a conveyer which is becoming less efficient over time could have a motor that has worn or could require a lubricant change.


The analysis, collection and visualisation software required for these applications can be expensive to purchase outright. Allowing plant managers to use their machines as a service rather than buying each package individually is becoming more popular. Because the services are integrated, life cycle management and software updates with enhanced features and security updates are combined as part of the service subscription.

With the wide range of options already available, it can be difficult to know which retrofitting solution would fit your plant best and how to overcome any compatibility issues that might arise. For complex systems, expert advice from an independent systems integrator such as Boulting Technology is advised. Choosing the correct option for your plant, process and systems is essential to achieving a wide range of benefits including better supply chain relationships, which four out of five manufacturers believe is possible.

For more information contact Kara Doble, Boulting Technology, +44 1785 245 466,,

Share via email     Print this page  

Further reading:

  • Data, light and the smart factory
    2nd Quarter 2019, Other technologies
    Photonics – the science of harnessing photons through the cutting edge use of lasers and fibre optics – has become a key technology for smart factories.
  • Condition monitoring for maritime sector
    2nd Quarter 2019, SKF South Africa, Other technologies
    The SKF Enlight Centre is an Internet-enabled, condition-based maintenance and condition monitoring system designed for the global marine industry.
  • Environmentally friendly wire rope lubricants
    2nd Quarter 2019, Other technologies
    The value of products like the Earthwise range supplied by Lubrication Engineers (LE) is immense because of their focus on non-toxicity.
  • Faster results with a digital twin
    2nd Quarter 2019, Siemens Digital Industries, Other technologies
    The digital twin allowed all the functions and permutations of the stacker to be simulated while simultaneously developing the initial motion control program to provide an optimum starting point for virtual commissioning.
  • Stepping carefully into the Fourth Industrial Revolution
    2nd Quarter 2019, Other technologies
    Rapid advances in technology and artificial intelligence in the mining industry raise issues like data protection, intellectual property ownership and legal liability.
  • High-speed manual chain hoist series
    2nd Quarter 2019, Becker Mining South Africa, Other technologies
    Becker Mining South Africa has recently launched Kito’s new high-speed CB manual chain hoist series.
  • Multi-jackbolt tensioners
    2nd Quarter 2019, Bearing Man Group T/A BMG, Other technologies
    BMG’s Superbolt multi-jackbolt tensioners reduce downtime and eliminate unsafe and laborious bolting methods, particularly in harsh operating conditions and in areas with limited working space.
  • Unique 360° lifting solutions
    2nd Quarter 2019, Other technologies
    A unique service whereby lifting machines and lifting tackle can be examined and tested on-site, giving clients peace of mind that they comply fully with all regulatory requirements, as well as ensuring the safety of all personnel, is available from the newly established Mandirk Lifting.
  • Superior quality festoon systems
    2nd Quarter 2019, Powermite - Div. of Hudaco Trading, Other technologies
    Superior quality festoon systems from Powermite deliver a reliable, efficient and uninterrupted feed of energy, data, air and fluids to electric mobile bulk materials handling machinery operating in mining and industry across southern Africa.
  • Unique hose crimper for SA market
    1st Quarter 2019, Hydraulic & Automation Warehouse, Other technologies
    Hydraulic and Automation Warehouse (HAW) has expanded its hose crimper offering with the addition of the Uniflex UG32 grease crimper to its range.
  • Gearbox lubricant helps combat water ingress
    1st Quarter 2019, Other technologies
    Rocol Rapid Demulse 220 from leading supplier Bearings Internatonal (BI) is ideal for demanding applications.
  • Conveyor belt skirting system
    1st Quarter 2019, Other technologies
    New to the range of bulk handling systems from BLT World is the contact-free AirScrape conveyor belt skirting system, which significantly reduces material spill, dust formation and explosion hazards at transfer points and other critical sections in the conveyor chain.

Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Terms & conditions of use, including privacy policy
PAIA Manual


    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.