Editor's Choice


Stepping carefully into the Fourth Industrial Revolution

2nd Quarter 2019 Editor's Choice Other technologies

Rapid advances in technology and artificial intelligence in the mining industry raise issues like data protection, intellectual property ownership and legal liability. In the current absence of specific legislation to govern emerging technologies like artificial intelligence, businesses must continue to rely on existing laws and ensure that they enter into robust contracts.

Aalia Manie is an expert in technology related law and intellectual property.
Aalia Manie is an expert in technology related law and intellectual property.

In December, government invited the public to nominate candidates to serve on the Presidential Commission on the Fourth Industrial Revolution (4IR). This development should be of interest to the mining industry, where artificial intelligence, big data and technology are rapidly converging in various ways.

Need for regulation

The 4IR is creating a need for regulation on issues such as unemployment, intellectual property (IP), data privacy and security, and liability for defects and loss of control.

The commission, announced in President Cyril Ramaphosa’s state of the nation address earlier in the year, will identify what strategies, policies and plans SA should put in place to position itself as a leading country in the technology revolution. However, these regulations have yet to be drafted and their nature and scope is not yet known.

In the mining sector, some companies are using digital twinning, a virtual reality environment that mirrors the mining environment and is used for training employees on potential risks in the workplace. They are increasingly investing in autonomous vehicles and equipment. There are also intelligent data analytics systems enabling valuable analysis of data, which are collected using the Internet of Things (IoT) technology. For example, the latest mining equipment can be fitted with sensors that generate messages about breakdowns or safety issues. With better data, capital and labour can both be optimised, allowing for better decision making.

Artificial intelligence legislation

Artificial intelligence is being deployed in a number of other industries too. Yet at present there is very little specific legislation, either in South Africa or anywhere else, to manage its effects. For companies wishing to access the latest emerging technologies, there are key issues that need to be addressed, no matter what business model is used.

When using or licensing technology systems or services owned by a third party, companies must be particularly cautious when they become reliant on that third party’s system or services in order to operate. Where the third-party technology is integral to ensure effective or ongoing operations, companies must protect their interests through careful contracting around issues such as scope of use, termination rights, service levels, liability for loss of access or defective service delivery and insolvency of the third party.

Contractual negotiation also presents challenges. When the technology owner is aware of the company’s reliance on the system, it has greater bargaining power in setting pricing and terms.

Be aware of the implications of IP ownership

Companies can also access or develop technology through commercial partnerships and joint ventures. A critical issue from an intellectual property perspective is ensuring clarity on ownership of jointly developed intellectual property and databases, and who owns and/or may use them if the relationship terminates – which may be particularly problematic if the termination happens on acrimonious terms.

A third way of procuring technology is through acquiring or ownership of the IP in the technology, which gives rise to typical merger and acquisition issues such as the necessity for a due diligence to confirm the rights of the seller in relation to the technology. Companies can also build new technology by developing it in-house or with an academic institution, as some mining companies are already doing. Companies using university facilities for research and development must be aware of the IP implications of engaging in publicly funded research and development through academic institutions, which are governed by the Intellectual Property from Publicly Funded Research and Development Act (IPR) Act.

Align with global best practice

The technology evolution is exciting, but it also presents challenges which must be carefully considered and addressed as part of effective business planning and strategy.

Whatever approach SA takes towards regulating artificial intelligence and emerging technologies, it should align itself as closely as possible with global best practice to ensure uniformity. SA has to remain competitive as a jurisdiction for technology investment, research and development.

For more information contact Nadine van Tonder, Teresa Settas Communications, +27 11 894 2767, [email protected], www.tscommunications.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

WEG partners with Panaco in the DRC
Zest WEG Group Africa Editor's Choice News & events
The strengthened presence of WEG in the Democratic Republic of Congo (DRC), through its strategic alliance with ts value-added reseller (VAR) Panaco, has proved to be highly successful.

Read more...
Execution of the massive Azmet Reactor project DRC
Editor's Choice News & events
The Azmet Reactor project, a collaborative effort led by Viva Engineering, involved fabricating six massive reactors that were over three stories high in Gauteng, and then transporting these more than 2500 kilometres to a mine in the DRC - where all 3265 parts fitted perfectly, with not even one of the 26 900 bolts out of place. This was a massive achievement.

Read more...
The time is now to implement a motor management strategy
Schneider Electric South Africa Editor's Choice Electrical switching & drive systems & components
Motor management plays an all-important role in controlling motor energy costs in various industries, segments and applications. Research and practical experience have consistently shown that effective motor management practices can result in significant energy savings, reduced operational costs, and improved overall system reliability.

Read more...
SKF’s successful raid action in Cape Town
SKF South Africa Editor's Choice Shaft power components
Authorities, with collaborative support from SKF, recently conducted a large and highly effective raid on a very well-known bearing seller of SKF bearings in Cape Town.

Read more...
Case study on automotive quality control
Motion Tronic Editor's Choice
Motion Tronic selected high-performance PLCs and HMIs from Inovance Technology to engineer a smart catalytic converter quality control solution for the exhaust facility at Toyota South Africa Motors.

Read more...
PC-based motion control on a labelling machine
Beckhoff Automation Editor's Choice Electrical switching & drive systems & components
For 50 years, Bausch+Ströbel in Germany has been developing packaging and production systems for the pharmaceutical industries. The company’s goal is to offer the best technical and economical solutions for the challenges of modern industry. Its new ESA1025 labelling machine shows how this is achieved with PC-based control from Beckhoff as the central motion controller.

Read more...
Thrust for hybrid electric flying
Editor's Choice Electrical switching & drive systems & components
Several leading academic institutes in Germany are collaborating on the future of hybrid electric flying. The partners are researching an entirely new propulsion system for medium-range aircraft with up to 35 passengers.

Read more...
Tough couplings for tough industries
Bearing Man Group T/A BMG Editor's Choice
BMG’s extensive range of power transmission components encompasses robust products from Regal Rexnord, a leading manufacturer of critical system components that perform efficiently under rigorous demands in diverse applications.

Read more...
Hydraulic connectors with residual pressure
Editor's Choice Hydraulic systems & components
Hydraulic connections are vital in both outdoor and indoor industrial machinery. However, the hydraulics lines frequently require connecting and disconnecting for maintenance or changeover. The goal is to enable quick, easy swaps to enhance machine flexibility and productivity.

Read more...
Inovance brings advanced motion control to South Africa
Motion Tronic Editor's Choice
Inovance and its South African distributor, Motion Tronic are launching the Easy Series PLC in this country, bringing its flexible, high-performance motion control solution to customers across South Africa in a wide range of industry sectors.

Read more...