Turning up the heat with a portable bearing heating solution
1 February 2020
Shaft power components
The new portable induction heater TWIM 15 from SKF uses medium-frequency technology to heat up roller bearings as well as other ring-shaped, metallic components.
This innovative device heats the bearing mounted with an interference-fit onto a shaft, generating up to a 90°C temperature difference between the bearing and shaft, causing the bearing to expand. This solution eliminates the need to use force, thereby facilitating the installation process.
Featuring two power settings, the electric TWIM 15 can heat sensitive components at a slower pace. In addition, a non-bearing power configuration is possible where most of the power is focused on the bore of the component.
The TWIM 15 is manufactured from glass-fibre, high temperature-resistant plastic. This smart construction combined with operating software produces a low temperature difference between the bearing’s inner and outer rings. This reduces internal tensions generated by excessive thermal expansion of the inner ring compared to the outer ring.
This robust construction material, together with the medium-frequency technology, makes the heater lightweight and noise-free; heat readings are conveniently displayed on a LED control panel. This user-friendly control panel also indicates when the TWIM 15 is operational, regulates temperature and does not requiring any special training.
The flat shape of the induction plate removes the need for a support yoke which allows for a variety of components to be heated on the plate. Furthermore, this versatile design reduces the number of required accessories.
Recently introduced to the Sub-Saharan African market, the TWIM 15 from SKF is easy to transport and store thanks to the practical built-in handle.
SKF launches the Patent Bay SKF South Africa
News & events
SKF is launching The Patent Bay, a new platform open to companies that aim to accelerate technologies with the potential to advance sustainability, by making selected patents freely available to others.
Read more...Innovative sealing and bearing solution for pulp machine SKF South Africa
Shaft power components
A leading South African manufacturer of paper-making equipment sought to modify an existing pulp machine and turned to trusted partner SKF to assist with the redesign of a critical sealing arrangement.
Read more...Oil monitoring solution drives performance gains for paper mill SKF South Africa
Other technologies
By integrating real-time monitoring with precise flow control, SKF’s Flowline oil monitor meters have significantly improved the flow rate control and performance of oil circulation lubrication systems installed on a paper mill.
Read more...Polymer bearings for maintenance-free bottling system igus
Shaft power components
A favourite South African beer which is to be found on many a beer connoisseur’s table is being brewed in Belgium with the assistance of lubricant-free polymer bearings that will not contaminate the beer.
Read more...Industrial valve solutions Bearing Man Group T/A BMG
Shaft power components
BMG’s Fluid Technology division supplies and supports an extensive range of components for fluid technology systems. These include valves, hydraulic hoses and fittings, accumulators, cylinders, heat exchangers, hydraulic motors and hydraulic plumbing, as well as pumps and reservoir accessories.
Read more...Direct-controlled seat valve
Shaft power components
A new direct-controlled seat valve enables storage-free, load-tight holding functions in dynamic linear units without an additional control pressure supply, and offers significant advantages over classic, pilot-controlled solutions, particularly in stationary and servo hydraulics.
Read more...Condition monitoring in hazardous areas SKF South Africa
Other technologies
SKF is further strengthening its condition monitoring offer portfolio by a newly developed hazardous area version of its Microlog Analyzer dBX portable vibration analyser.
Read more...Wind energy in the Black Forest
Shaft power components
For more than 20 years, numerous wind turbines have stood in the Black Forest and are now receiving a performance boost through repowering projects.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version